Hedged TWG facades are facades with a rear ventilation room between thermal insulation and
Xterior Compact / Xterior Compact F or for uninsulated structures and wooden buildings between the load -bearing
Underground and Xterior Compact / Xterior Compact F. The rear ventilation room is due to supply air openings on the
Underside and exhaust air openings on the top of the wall or wall sections (e.g.
tung) connected to the outside air and thus enables constant air change.
Purchased behind ventilated facades (VHF) consist of:
1. Xterior Compact / Xterior Compact F
They serve the weather protection and facade design.
2. Hinting ventilation
The rear ventilation room is an area flows from the outside between the
Inside the clothing and the outside of the wall or thermal insulation. This serves the moisture
Protection of the layers behind it, the derivation of moisture loads from inside or outside as well as the
Management of the summer warming.
3. Substructure
Substructures for VHF can be made of metal, wood or fiber reinforced plastics and combinations
can be made from these materials.
4. Trot profile
Trot profiles are elements that mechanically combine the components of the substructure with each other.
5. Fastening point
Fastening points are points that the Xterior Compact / Xterior Compact F on the substructure mecha
Fasten niche by metal elements or by means of gluing.
6. Insulation material
Thermally insulating layer between anchorage and rear ventilation room; The thermal insulation
can- depending on the material- also fulfill fire and soundproofing functions.
7. Wall underground
The reason for anchoring is the load -bearing construction of the building. It serves to record the static
loads. The substructure is anchored in the structure.
Surface layers, e.g. B. plaster, coatings, are usually not sustainable.
Disponibilità Regionale
Europa |
---|
Austria |
Germania |
Svizzera |