Pubblica i tuoi prodotti
Fire Resistant Cavity/Smoke Barrier
Fire Resistant Cavity/Smoke Barrier
    Promat

    Fire Resistant Cavity/Smoke Barrier

    The purpose of a cavity and smoke barriers is to prevent the spread of smoke and flame from penetrating and/or moving within a concealed space in a fire compartment. Documents supporting the regulations provide guidance on where such barriers should be located within hidden voids in a building and they usually give examples of deemed-to-satisfy barriers for voids in or above stud walls or partitions.

    If a barrier in a concealed space coincides with a compartment wall or floor it will normally be required to provide the same fire performance as the wall or floor. If the barrier is located between such compartment walls or floors however, the barrier is defined as a “cavity barrier” and will normally only be required to provide 30 minute integrity and 15 minute insulation (depending on local building regulations).

    A parapet is a low standing wall above a roof, on top of either an external wall or a fire separating wall. A parapet wall is supposed to prevent fire venting through the roof on one property and crossing over the separating wall down into any adjacent property.

    A spandrel panel is used generally as part of curtain walling systems. The spandrel panel generally protects vertically up from the top of a floor slab, or down from the underside of a floor slab. Spandrel panels are supposed to deflect fire and prevent spread of flames via the ends of floor slabs. A spandrel wall is designed to form a separator at any part of a window or an opening in an external wall above another opening in the storey below. The vertical construction projects no further than 450mm outside the lower opening.

    Parapet and spandrel walls should normally be approved in accordance with the criteria of BS 476: Part 22: 1987, which is required to satisfy a minimum fire resistance of 60/60/60 (for exceptions please check with local building regulations guidance documents or, if relevant, insurance codes).

    Specifiche tecniche
    • Rif. Unicocavity_barrier
    • Famiglia di prodottoFire Products
    • Gruppo di famigliaCavity and Smoke Barriers
    • TipoMontaggio (oggetti multipli)
    • Data di pubblicazione2021-06-09
    • Numero di versione1
    • Altezza (mm)2440
    • Larghezza (mm)1220
    Relativo a
    • Materiale principaleSilicato di calcio
    • Progettato inHong Kong
    • Prodotto inHong Kong
    Classificazioni
    • Categoria BIMobjectProdotti antincendio - Antincendio
    • Clasificazione IFCOggetto
    • Codice ETIMEG000056
    • Nome ETIMFire protection systems
    • Nome UNSPSCFire protection
    • Codice UNSPSC4619

    Disponibilità Regionale

    Asia Oceania
    Armenia
    Australia
    Azerbaijan
    Figi
    Bangladesh
    Guam
    Bhutan
    Isola Norfolk
    Brunei
    Isole Cook
    Cambogia
    Isole Marianne Settentrionali
    Cina
    Isole Marshall
    Corea del Nord
    Isole Minori Esterne degli Stati Uniti
    Corea del Sud
    Isole Pitcairn
    Filippine
    Isole Salomone
    Georgia
    Kiribati
    Giappone
    Nauru
    Hong Kong
    Niue
    India
    Nuova Caledonia
    Indonesia
    Nuova Zelanda
    Isola di Natale
    Palau
    Isole Cocos (Keeling)
    Papua Nuova Guinea
    Kazakistan
    Polinesia Francese
    Kirghizistan
    Samoa
    Laos
    Samoa Americane
    Macau
    Stati Federati di Micronesia
    Maldive
    Timor Est
    Malesia
    Tokelau
    Mongolia
    Tonga
    Myanmar (Burma)
    Tuvalu
    Nepal
    Vanuatu
    Pakistan
    Wallis e Futuna
    Singapore
    Sri Lanka
    Tagikistan
    Tailandia
    Taiwan
    Territori Britannici dell'Oceano Indiano
    Turkmenistan
    Uzbekistan
    Vietnam