Slab without bevel pavinature 60x40

Prefabricated high-strength concrete pavement of the Pavigesa® brand. Conceived to be used in outdoor spaces, for use with vehicle traffic or pedestrian use, it meets all the requisites required by current regulations regarding mechanical resistance, durability and slipperiness in any climatic situation. In Pavigesa® we use Econature® technology, which converts our prefabricated concrete pavements into photocatalytic NO2 collectors, converts the neutralization of greenhouse gases in cities. Our Econature® flooring requires the required Class 3 decontamination requirement according to UNE 127197-1 2013. Every detail is important, so our pavers are manufactured using a unique pressure and sealing system in the market, specially designed by Pavigesa® for 35 years to help close the exterior pores of the paver, thus achieving a uniform and waterproof finish of a unbeatable quality. In Pavigesa® we use 20% of raw material obtained from recycled material, mostly from the manufacturing system itself, thus contributing to a very low production of CO2 in the manufacturing process.

Voce di capitolato

Pavigesa® brand vibro-pressed concrete paving pavement. Physico-mechanical characteristics: • Breaking load T> = 3.6 Mpa • Breaking load per Unit of Length (F)> = 250 N / mm² • Abrasion wear resistance Class 4 Marking I • Class 3 slip / slip resistance according to CTE. Average declared value 75.0 - USRV • Water Absorption Class 2 Marking B • Climate resistance Class 2 Marking B. Water absorption% by mass <= 6% PAVIGESA® PREFABRICATED ADOQUINES AND Slab INSTALLATION RECOMMENDATIONS 1st Supporting Base: • Option 1: Compacted floor, 20cm to 25cm • Option 2: Reinforced concrete flooring, 15cm to 20cm with 15x15x6mm welded mesh on compacted floor, 20cm to 25cm It will depend on the stability of the land. 2nd Placement of pavers and slabs: • 4 cm of river washed sand without clays or 4 cm of gravel with 0-5mm granulometry. • Pavigesa® tile or paver. • Grouting with silica sand in successive sweeps up to 90-100% of the joint. The approximate amount used will be 7.0 kg / m2 • Compaction with 400Kg mechanical tray (rubber). Not recommended for large tiles. • Final grouting until the board is clogged. The placement of the paving system and slabs is done as a flexible pavement, so there is no need to include cement mortar in its placement as long as the contour of the surface to be covered is properly confined (curb or any other confinement system .) It is not necessary to use additional separators in the parts.

Specifiche tecniche

Rif. Unicobaldosa_sin_bisel_pavinature_60x40
Famiglia di prodottoSlabs
Gruppo di famigliaSlabs
TipoOggetto (oggetto singolo)
Data di pubblicazione2019-10-08
Numero di versione1
Altezza (mm)400
Larghezza (mm)600

Links

Link al Prodottohttps://www.pavigesa.com/productos/losa-pavinature-60x40
Video di istruzionehttps://www.creur.es/gu%C3%ADas-de-montaje/

Relativo a

Materiale principaleCalcestruzzo
Materiale secondarioCalcestruzzo
Progettato inSpagna
Prodotto inSpagna
Peso Netto (Kg)130

Classificazioni

Categoria BIMobjectMateriali da costruzione - Autobloccanti e drenanti
Clasificazione IFCFloor
Nome UNSPSCConcrete tiles or flagstones
Codice UNSPSC30131703
Codice Uniclass 2015Pr_25_93_60_19
Descrizione Uniclass 2015Concrete pavers
Codice CSI MasterFormat 201432 13 13
Titolo CSI MasterFormat 2014Concrete Paving
Numero OmniClass23-11 21 17 11 17
Titolo OmniClassPrecast Concrete Pavers

Disponibilità Regionale

Sud America	Nord America	Europa
Argentina	Bahamas	Spagna
Bolivia	Belize
Cile	Costa Rica
Colombia	Cuba
Ecuador	El Salvador
Guiana Francese	Giamaica
Guyana	Guatemala
Isole Falkland (Malvine)	Haiti
Paraguay	Honduras
Perù	Messico
Suriname	Nicaragua
Uruguay	Panamá
Venezuela	Porto Rico
	Repubblica Dominicana
	Trinidad e Tobago