GridSpan™ Translucent FRP Skylight Systems

GridSpan™ Translucent FRP Skylight Systems

GridSpan™ translucent panel skylights feature a lightweight sandwich panel design with fiberglass reinforced polymer (FRP) face sheets that provide light and solar heat gain control. Their high thermal performance and unique aesthetic make them a versatile design tool that’s customizable for a range of applications. Specialty configurations for hurricane and blast protection, mixed glazed systems that integrate glass glazing, and more are also available.

Product Highlights

GridSpan™ is available with a variety of insulation options and a 4” panel option, enhancing thermal performance.
Numerous standard shapes (pyramids, polygons, single slopes, ridges) as well as fully custom designs
Standard or custom grid patterns allow for design flexibility
FRP face sheet is available in a range of colors
High-performance sealants protect against air and water infiltration
Built-in gutters on framing members provide moisture management
Thermally broken panels and framing available for enhanced condensation resistance
Individual panels up to 5 feet wide and 20 feet long (depending on load requirements)
Spectra-Grid™ color option provides a stained-glass-like look
Numerous finish options available – from clear anodize to custom color matching
Allows for integration of glass glazing for a combination of light control and views

Voce di capitolato

- Glazing Panel Thickness: 2.75 in (69.85 mm) & 4 in (101.6 mm)
- Panel Width: Up to a Maximum of 5 ft nominal (60 in) (1524 mm)
- Panel Length: Up to 20 ft long (may vary with load requirements)
- Panel Weight: 1.5-2 lbs/ft²
Base Options
- Technology: Ultimate Series™ face sheet technology for long-term performance
- Glazing Color Options: Interior: Crystal or White, Exterior: Crystal, White, Ice Blue, Aqua, Desert Rose, Tan (Consult KLA for other custom options)
Thermal Performance (U-Value)
- 2.75-inch system U-Factor - NFRC certified - 0.59 to 0.22 (subject to color selection and other options - see data sheet for full details and performance)
- 4-inch system U-Factor - NFRC certified - 0.22 to 0.17 (subject to color selection and other options - see data sheet for full details and performance)
- 2.75-inch system SHGC - NFRC certified – 0.45 to 0.08 (subject to color selection and other options - see data sheet for full details and performance)
- 4-inch system SHGC - NFRC certified - 0.15 to 0.06 (subject to color selection and other options - see data sheet for full details and performance)
- 2.75-inch system Visible Transmittance - NFRC certified - 0.45 to 0.04 (subject to color selection and other options - see data sheet for full details and performance)
- 4-inch system Visible Transmittance - NFRC certified - 0.16 to 0.02 (subject to color selection and other options - see data sheet for full details and performance)
Certification + Test Results
- Code Compliance, IBC - ASTM D635, D1929, E84, UL723, - CC1 Rating (Interior Sheet), CC2 Rating (Exterior Sheet) (Complies as specifically detailed in the ESR-2855 report)
- Uniform Load Structural / Spans - ASTM E330 - Span: 6ft up to 16 ft - Consult KLA for job specific span capabilities
- High Velocity Hurricane Zones - TAS 201/202/203 - Missile Impact Level D, Up to 65psf
- Water Penetration - ASTM E331 - Pass at 15 psf
- Air Infiltration - ASTM E283 - Pass
- Impact Strength - UL 972 - Standard Exterior Sheet - five impacts at 64 ft-lb / High-Impact Exterior Sheet - 200 ft-lbs - no penetration / High Impact Interior Sheet - 245 ft-lbs - no penetration / Class “A” Sheet - 245 ft-lbs - no penetration / Section 6.3 (Outdoor Impact): Material shall withstand five 40ft-lb impacts / Section 6.4 (Indoor Impact): Material shall withstand five 50ft-lb impacts / Section 6.5 (High Energy Impact): Material shall withstand one 200ft-lb impact
- Structural Performance - AAMA/WDMA/CSA 101/I.S.2/ A440-05 REQ. Sect - No permanent deformation > 0.2%
- Taber Abrasion Test - ASTM D4060
- Color Difference* - ASTM D2244
*For additional details and testing contact KLA

Specifiche tecniche

Rif. Unicogridspan-translucent-frp-skylight-systems
Famiglia di prodottoDaylighting Systems
Gruppo di famigliaTranslucent Skylight Systems
TipoOggetto (oggetto singolo)
Data di pubblicazione2025-03-07
Numero di versione1

Links

Relativo a

Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectFinestre - Lucernari
Clasificazione IFCTetto
Codice Uniclass 2015Ss_30_10_30_20
Descrizione Uniclass 2015Glazed unit roof framing systems
Codice CSI MasterFormat 201408 45 23
Titolo CSI MasterFormat 2014Fiberglass-Sandwich-Panel Assemblies
Numero OmniClass23-13 33 27 19
Titolo OmniClassGlazed Roof Structures

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago