i200 Commercial Tankless System - Wall Hung

i200 Commercial Tankless System - Wall Hung

On-Demand Commercial Tankless Water Heater

KEY FEATURES

• Stainless (316L) Heat Exchanger

• Flexible-Floating Design, stress-relieving and thermal
shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"-
14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data,
troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Voce di capitolato

Type Indoor/Outdoor, Wall-Hung, Commercial, Tankless, Fully Condensing, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 199,950
Thermal Efficiency 94% 92%
Energy Factor 0.93 N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Venting Materials Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel (AL29-4C)
Max 3” Vent Length - Single Pipe / Power Vent 200 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 100 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent
(2” not allowed at elevations above 4,000 ft)
26 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Two Pipe / Direct Vent
(2” not allowed at elevations above 4,000 ft)
21 ft, deduct 5 ft per 90° elbow
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)
FEATURES

Specifiche tecniche

Rif. Unicoi200
Famiglia di prodottoi Series
Gruppo di famigliaCommercial Tankless System - Wall Hung
TipoOggetto (oggetto singolo)
Data di pubblicazione2020-05-11
Numero di versione1

Links

Link al Prodottohttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i200-i-series/
Istruzioni di installazionehttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii
Certificazione di Prodottohttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii
Descrizione Tecnicahttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii

Relativo a

Materiale principaleAcciaio
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
Clasificazione IFCScambiatore di calore
Codice ETIMEC000392
Nome ETIMInstantaneous water heater
Nome UNSPSCCommercial water heaters
Codice UNSPSC40101826
Codice Uniclass 2015Pr_60_60_96
Descrizione Uniclass 2015Water heaters
Codice CSI MasterFormat 201423 00 00
Titolo CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
Numero OmniClass23-31 29 11
Titolo OmniClassInstantaneous Hot Water Heaters
Codice CSI UniFormat IID3090
Titolo CSI UniFormat IIOther HVAC Systems & Equipment

Disponibilità Regionale

Nord America	Sud America
Anguilla	Guyana
Antigua e Barbuda	Suriname
Aruba
Bahamas
Barbados
Belize
Canada
Cuba
Curaçao
Dominica
Giamaica
Grenada
Guadalupa
Haiti
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Montserrat
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago