• Standard equipment to choose
- Optional extras
Ordering width:
• 2000 mm
• 2100 mm
• 2250 mm
Ordering length (installation height):
• 2000 mm (? mm)
• 2500 mm (? mm)
• 2750 mm (? mm)
• 3000 mm (? mm)
Dock leveller levelling dependent on ordering length and means of transport.
In accordance with EN 1398, a max. slope of 12.5% (approx. 7°) is permissible for all industrial truck types.
Design:
Dock leveller with torsional flexibility, platform with reinforcement profiles at the bottom side, electrohydraulic system with 2 main cylinders, welded steel frame
Insulation panels, 50 mm thick, directly below the platform and lip, panel under lip moves when extending. Vertical and horizontal gap sealing, brush seals, seals made of tarpaulin material.
Panel under platform:
• Flush with the dock leveller at the front (for door guide on dock leveller)
- Protruding 160 mm (for door guide in front of the dock leveller)
• Carrying capacity: Rated load 60 kN acc. to EN 1398
Note: Restriction of total weight of industrial trucks with PU/Vulkollan rollers recommended to prevent lane grooves in the platform: For reach lift trucks max. 4 t, for industrial trucks max. 6 t. This figure does not change the rated load!
Platform
made of moulded, anti-slip steel (running plate S235).
Platform material thickness: 8/10 mm
Lip
made of moulded, anti-slip steel (running plate S355).
Application areas: Logistics, commercial halls, industrial halls, warehouses, inside the hall
(7 recensioni)
