LARGO-TWIST 2045 Wire Mesh

The HAVER Architectural Mesh LARGO-TWIST 2045 is characterized by its tilted horizontal flat wires. It creates a homogenous appearance with reduced transparency and extensive brilliance. Depending on the orientation of this mesh type, it is well suitable as an effective sun or privacy screen.

Sun protection mesh with excellent shading values
With a sunlight incident angle of 60°, the energy input is reduced by more than 90 %. This effects in combination with a sun protection glazing a g-value of only 0.02.

Mounting solution for facades
Stainless steel wire mesh can be tensioned over several storeys using flat tension profiles, clevis screws and pressure springs. Especially in exterior applications, structural characteristics require the use of pressure springs. They lend sufficient elasticity to the wire mesh when exposed to respective loads. A solid substructure for absorbing the resulting loads is required at the top and bottom mounting points. Intermediate mounting is provided at each floor level by means of a round tube and wire connectors running behind the mesh. Standing in front of the element the intermediate mounting is almost invisible.

Based on technical requirements, other endings and tensioning systems are also possible. Special mounting solutions are individually determined and implemented with planners and contractors.

HAVER Architectural Mesh comes ready to install with complete and easy-to-follow instructions. Once installed, stainless steel architectural mesh facades require little to no maintenance.