Pubblica i tuoi prodotti
Fireray 5000 Beam Smoke Detector

Fireray 5000 Beam Smoke Detector

The Fireray® 5000 System is an auto-aligning, self-correcting infrared reflective Beam Smoke Detector. Up to 2 Detector heads can report to a single ground level controller. In addition, each system controller houses two pairs of fire and trouble relays, one per Detector. Once the Detector head is installed, using the easy fit mounting system, an integral LASER can be activated. This allows the reflective Prism to be located quickly with confidence.

The Auto-Align function ensures proper alignment and maximum signal during the Beam installation. Building Movement Tracking™ automatically steers and maintains the Beam in the optimum position for reliable performance. The signal generated in the Transmitter element and reflected by the Prism back to the Receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.

The system is designed to be mounted so the Beam will project between 19” (0.5m) and 24” (0.6m) below the ceiling. Lateral detection may be up to 30ft. (9.144m) on either side of the Beam, providing a maximum total coverage area of up to 19,800 square feet (60ft. x 330ft. or 18.29m x 100m). For installations complying with UL268/NFPA72, the maximum distance of Detector and Reflector from the ceiling must be 10% of the distance between floor and ceiling.

Features

• Up to 2 Detector Heads reporting to one Low-Level Controller
• Range of 26.2 ft to 328 ft (8 m to 100 m)
• Long Range Prism kit extends range from 160ft (50m) to 330ft (100m)
• Built in Laser assisted Prism mounting
• Auto-Alignment 2 to 4 minutes per head
• Building Movement Tracking™: Auto-Correction due to building shift
• Built-in electronic UL/ULC/FM obscuration-acceptance fire test
• Contamination compensation
• Separate Trouble and Alarm relays for each of the 2 channels
• Password protected settings
• Low current draw 5 to 8.5mA
• Built-in 1/2”/M-20 conduit knock-outs on the system Controller
• Programmable alarm thresholds: 10% - 60% in 1% increments
• Programmable Fault and Alarm delay: 2-30 Seconds

Specifiche tecniche
  • Rif. Unicofireray-5000-beam-detector
  • Famiglia di prodottoFire Protection Products
  • Gruppo di famigliaSmoke Detectors
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2023-10-23
  • Numero di versione1
Relativo a
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectProdotti antincendio - Antincendio
  • Numero OmniClass23-29 29 13 11
  • Titolo OmniClassSmoke Detectors

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago