Pubblica i tuoi prodotti
SafeFire Linear Heat Detection Cable with Optional DLM-Z2 Controller and

SafeFire Linear Heat Detection Cable with Optional DLM-Z2 Controller and

The sensing cable is formed from a pair of twisted steel conductors each with temperature sensitive insulation and then an overall outer sleeve. When the temperature sensitive insulation reaches its predetermined alarm temperature the two conductors short together providing the alarm signal. The cable can be connected to any unit capable of monitoring a switched or digital alarm signal (i.e. conventional fire panel, addressable switch monitor unit or PLC). The fire detection capability can be enhanced when the LHD is used in conjunction with the Digital Location Interface (DU).

LHD cable is classified as a "simple device" and so with the use of suitable Intrinsically Safe (IS) barriers to limit the energy to a safe level, it can be used in hazardous areas. The Linear Heat Detection cable can be cut to length as required and with its ease of installation and low maintenance it provides a cost effective solution where project expenditure requires to be kept at a minimum. The Linesense Linear Heat Detection cable has the widest range of Alarm temperatures 68°C to 240°C.

Features

  • Simple digital switch operation
  • Continuous sensing along the total length of the element
  • Fixed alarm temperature. Unaffected by changes in ambient temperature
  • Compatible with switch monitoring units and conventional alarm panels
  • Suitable for use in Hazardous areas using safety barriers
  • UV resistant PVC outer sleeve
  • Rugged and durable construction
  • Simple maintenance free installation
  • Small diameter and bend radius
  • FM Approved
Specifiche tecniche
  • Rif. Unicodlm-z2_controller-and-linear-heat-detection-cable
  • Famiglia di prodottoFire Protection Products
  • Gruppo di famigliaLinear Heat Detection
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2023-10-23
  • Numero di versione1
Relativo a
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectProdotti antincendio - Antincendio
  • Clasificazione IFCAllarme
  • Codice ETIMEC001763
  • Nome ETIMFire detector
  • Codice Uniclass 2015Ss_75_50_28_29
  • Descrizione Uniclass 2015Fire detection and alarm systems
  • Codice CSI MasterFormat 201428 31 00
  • Titolo CSI MasterFormat 2014Fire Detection and Alarm
  • Numero OmniClass23-29 29 00
  • Titolo OmniClassFire Detection Devices

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago