Flo-Motion Single Door - Type E32

FLO-MOTION® TYPE E32

SINGLE DOOR SLIDING OVER A WALL

• Description - Manual aluminium framed sliding internal glazed door system with the door sliding over a wall. Door to be severe duty standard including sliding door mechanism.
• Manufacturer - Axis Entrance Systems Ltd.
• Product reference - Axis Flo-motion® Sliding Door System Type E32
• Doorset Specification - The aluminium doorset to be formed from non-thermal aluminium extruded box section and to include a self-supporting "goal post" frame consisting of two jambs (152mm and 100mm x 45mm profiles) and a 125mm x 100mm transom bar with a 7mm reinforced face. The door to close onto the "slam post" that forms part of the jamb. The frame to fit within the structural opening (refer to door schedule for dimensions) with the door sliding over a solid wall.
• Handing – Left (E32L) or right hand (E32R) door opening viewed from pelmet side. Refer to drawing and door schedule.
• Track System - The sliding door to employ a "low friction" recirculating bearing system & track. A "damper" mechanism (not self or soft closing) to be installed and active when the door is at the closed and fully open positions. A pelmet to conceal the track and complete with a "hold open" lid for ease of maintenance. For overall track length, refer to door schedule for dimensions.
• Sliding Door – Formed from various 100mm x 47mm aluminium profiles. The door to be prepared with a bottom channel to operate with a floor mounted nylon guide.
• Material Finish – SAA (satin anodised aluminium)
• Seals - Neoprene seals to be fitted to the leading edge of the sliding door, the rear stile facing the fixed screen and on the transom bar.
• Handles - One pair of "back to back" nylon handles, 600mm in length, to be fitted to the sliding door leaf.
• Manual Locking – Refer to door schedule
• Electric locking – Refer to door schedule
• Threshold – Refer to door schedule
• Glazing – Refer to door schedule and manufacturer’s door parameters. Units to be secured using appropriate beads & gaskets.
• Manifestation – Refer to door schedule
• Blind Operation – Refer to door schedule
• Structural Support - The doorset will be fixed to suitable supports (e.g. masonry or structural steels). Assessment by clients Structural Engineer and installed by the Building Contractor. Refer to Manufacturer’s drawings for Type E32.
• Structural Opening Dimensions – Refer to door schedule and manufacturer’s door parameters
• Clear Opening Width – Refer to door schedule (distance between frame and leading edge of door when in the fully open position).
• Clear Opening Height - Refer to door schedule (distance between bottom of pelmet & FFL).
• Force Testing – The manual sliding doors should be easily operated by hand. The sliding doors to be digitally force tested 3 times (distance determined by door width). A certificate to be issued showing the mean average opening & closing force of 10N (+/-5N) with test data in graph format. Refer to door schedule and manufacturer’s door parameters.
• Architraves & Trims – Refer to door schedule