i200 Commercial Tankless System - Wall Hung

i200 Commercial Tankless System - Wall Hung

On-Demand Commercial Tankless Water Heater

KEY FEATURES

• Stainless (316L) Heat Exchanger

• Flexible-Floating Design, stress-relieving and thermal
shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"-
14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data,
troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Specifikáció

Type Indoor/Outdoor, Wall-Hung, Commercial, Tankless, Fully Condensing, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 199,950
Thermal Efficiency 94% 92%
Energy Factor 0.93 N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Venting Materials Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel (AL29-4C)
Max 3” Vent Length - Single Pipe / Power Vent 200 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 100 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent
(2” not allowed at elevations above 4,000 ft)
26 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Two Pipe / Direct Vent
(2” not allowed at elevations above 4,000 ft)
21 ft, deduct 5 ft per 90° elbow
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)
FEATURES

Műszaki specifikáció

Egyedi azonosítói200
Termékcsaládi Series
TermékcsoportCommercial Tankless System - Wall Hung
TípusObjektum (egy termék)
Megjelenés dátuma2020-05-11
Verziószám1

Linkek

Termékadatlaphttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i200-i-series/
Szerelési útmutatóhttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii
Terméktanúsítványhttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii
Műszaki leíráshttps://intellihot.com/resources/downloads/gen-ii/profile/i200-gen-ii

Kapcsolódó adatok

Elsődleges anyagAcél
Tervezés helyeEgyesült Államok
Gyártás helyeEgyesült Államok

Besorolások

BIMobject kategóriaHVAC - Water heaters
IFC besorolásHőcserélő
ETIM CodeEC000392
ETIM NameInstantaneous water heater
UNSPSC névCommercial water heaters
UNSPSC kód40101826
Uniclass 2015 kódPr_60_60_96
Uniclass 2015 leírásWater heaters
CSI MasterFormat 2014 kód23 00 00
CSI MasterFormat 2014 névHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass szám23-31 29 11
OmniClass névInstantaneous Hot Water Heaters
CSI UniFormat II kódD3090
CSI Uniformat II névOther HVAC Systems & Equipment

Termék elérhetősége

Észak-Amerika	Dél-Amerika
Anguilla	Guyana
Antigua és Barbuda	Suriname
Aruba
Bahama-szigetek
Barbados
Belize
Brit Virgin-szigetek
Caribbean Netherlands
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
Grenada
Guadeloupe
Haiti
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Montserrat
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek