Termékek közzététele
Model 9201E AXION® Emergency Tempering Valve

Model 9201E AXION® Emergency Tempering Valve

Model 9201E AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).

Model 9201E emergency mixing valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

  • A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
  • AXION's superior design and technology provide a complete safety solution for increased victim comfort.
  • Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
  • Wax based thermostat technology for fast response time with proven highly reliable temperature control
  • Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
  • Brass valve design with internal check stops
  • Over-sized valve seats resist failures caused by foreign matter
  • A new and efficient shuttle design eliminates valve sticking
  • A custom funnel design improves temperature control at low flow rates
  • Outlet temperature is factory set to 85° F (29° C).
  • Tempered water: High temperature limit is factory set to 90° F (32° C).
  • Cold water by-pass valves are closed during normal operation, regardless of flow rate.

CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1, and applicable sections of CSA B125.3.

Specifikáció
  • Model 9201E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The improved brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85° F (26° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90° F (16 - 35° C). Maximum inlet temperature: 180° F (82° C). Recommended inlet temperature: 140° F (60° C). Minimum inlet temperature: 120° F (49° C) Inlets 1-1/4" NPT(F). Outlet 1-1/4" NPT(F).

Műszaki specifikáció
  • Egyedi azonosítóhaws-9201e
  • TermékcsaládPipework Fittings
  • TermékcsoportTempered Water Systems
  • TípusObjektum (egy termék)
  • Megjelenés dátuma2015-05-26
  • Verziószám1
  • Magasság (hüvelyk)5
  • Szélesség (hüvelyk)4
  • Mélység (hüvelyk)8
Kapcsolódó adatok
  • Elsődleges anyagFém
  • Tervezés helyeEgyesült Államok
  • Gyártás helyeEgyesült Államok
  • Nettó tömeg (font)10
Besorolások
  • BIMobject kategóriaVízvezeték-szerelés - Vezetékek
  • UNSPSC névThermal batteries
  • UNSPSC kód26111713
  • Uniclass 2015 kódPr_65_54_95_88
  • Uniclass 2015 leírásThermostatic mixing valves
  • OmniClass szám23-27 31 29 15
  • OmniClass névThermostatically Controlled Mixing Valves

Termék elérhetősége

Észak-Amerika
Egyesült Államok
Kanada