Heat & Condensate Exhaust Only Vent Hood, VHB Series

VHB Series

Heat & Condensate Exhaust Hood
The VHB Series is CaptiveAire's Premier Type II, Exhaust Only hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

ADVANTAGES

Superior Exhaust Flow Rates:
Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust.
Reduced Lead Times and Shipping Costs: Produced on a high volume assembly line at one of five manufacturing facilities to reduce lead times and shipping costs.
Optional REM Construction: Two options available when removable condensation baffles are required for heavy condensate applications. Designs available for one baffle or two baffle configuration to collect and drain condensation into gutter.
Optional Double Wall Construction: Double wall front used when switches are needed on the face of the hood and/or lights are desired. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
Optional Lights: Incandescent, LED and fluorescent lights are available.
Optional Make-Up Air: Up to 80% make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

PERFORMANCE
ConfigurationLight Load Exhaust CFM/ftHeavy Load Exhaust CFM/ftWall & 1-piece island 100 150

CERTIFICATIONS
The VHB Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models VHB are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.

Műszaki specifikáció

Egyedi azonosítócaptiveaire-042
TermékcsaládHVAC
TermékcsoportHood and Ventilation Equipment
TípusObjektum (egy termék)
Megjelenés dátuma2012-10-15
Verziószám1

Linkek

Termékadatlaphttp://www.captiveaire.com/CATALOGCONTENT/HOODS/VHB/index.ASP?catid=304

Kapcsolódó adatok

Tervezés helyeEgyesült Államok
Gyártás helyeEgyesült Államok

Besorolások

BIMobject kategóriaHVAC - Gépi ventilláció
Uniclass 2015 kódSs_65_40_33_51
Uniclass 2015 leírásMechanical supply ventilation systems
CSI MasterFormat 2014 kód23 00 00
CSI MasterFormat 2014 névHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass szám23-33 00 00
OmniClass névHVAC Specific Products and Equipment
CSI UniFormat II kódD30
CSI Uniformat II névHVAC

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek