ARDEX SD M™ Designer Floor Finish™

ARDEX SD-M™ is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.

Key Features

Use over concrete, terrazzo and ceramic, quarry and porcelain tile
Provides a smooth, permanent, durable finish
Easy to mix and apply
Mixes with water only, no additives necessary
Outstanding coverage with excellent bond
Mold and mildew resistant
Portland cement-based
Use for interior floors only
Can be used to create a burnish-polished surface on indoor concrete
Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications

Specifikáció

Installation
Mixing Ratio: 2 quarts (1.9 L) of water to one 10 lb. (4.5 kg) bag
For smaller batches, use 2.5 parts powder to 1 part water by volume for the scratch and finish coat, or 3.5 parts powder to 1 part water for filling pop-outs and spalls.
Coverage: 80 – 100 sq. ft. (7.4 – 9.3 sq. m) per bag in 2 coats; (Actual coverage may vary)
Performance
Initial Set (ASTM C191): Approx. 45 minutes
Final Set (ASTM C191): Approx. 90 minutes
Compressive Strength (ASTM C109/mod – Air Cure Only): 5,000 psi (352 kg/sq. cm.) at 28 days
Flexural Strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
Walkable: 2 hours
Begin Processing: 24 – 72 hours
Colors Available: Gray and White
Packaging: 10 lb. (4.5 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly.
VOC: 0
Shelf Life: 6 months, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.

Műszaki specifikáció

Egyedi azonosítóARDEX-sd-m
TermékcsaládARDEX Surfaces
TermékcsoportOverlays and Toppings
TípusObjektum (egy termék)
Megjelenés dátuma2024-02-21
Verziószám1

Linkek

Termékadatlaphttps://www.ardexamericas.com/product/ardex-sd-m/
Útmutató videóhttps://youtu.be/dSvCKuw6wRY
Műszaki leíráshttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-SD-M-Technical-Data-3.pdf

Besorolások

BIMobject kategóriaBurkolás - Szőnyeg alatti hő- és hangszigetelő réteg
IFC besorolásFloor
UNSPSC névCarpet or rug underlays
UNSPSC kód30161719
Uniclass 2015 kódPr_35_31_06_80
Uniclass 2015 leírásSmoothing and levelling underlay compounds
CSI MasterFormat 2014 kód06 16 26
CSI MasterFormat 2014 névUnderlayment
OmniClass szám23-15 17 11 13 11 13
OmniClass névPortland Cement Floor Underlayments
CSI UniFormat II kódB1010
CSI Uniformat II névFloor Construction

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek