R 21 CE - Self-smoothing epoxy floor topping (0.5 – 1.0mm)

R 21 CE is a high gloss, self-smoothing, epoxy resin floor finish applied between 0.5 – 1.0 mm thickness. It combines outstanding wearing properties with chemical resistance and decorative finish. Ideally suited in situations where a seamless, joint free finish is required and maximum cleanliness is essential.

COLOURS
Available in any standard RAL colour

FEATURES
• Seamless: easily cleanable to maintain high standards of hygiene
• Tough & Hard wearing: durable with low maintenance cost
• Resistant to a wide range of chemicals and liquids
• Self-smoothing: provides a flat high gloss finish
• Suitable for use as topping on existing epoxy screed
• Food grade: CFTRI approved; confirms to the specifications as per U.S FDA 175.300
• Supplied in pre-measured packs for 0.5 mm and 1 mm thickness requirements

Ardex Endura

Specifikáció

Pot life: 30 minutes
Initial hardness: 24 hours
Full cure: 7 days
Bond strength: > 1.5 N/Sqmm
Compressive strength BS 6319 (P2): > 50 N/Sqmm
Flexural strength BS 6319 (P3): > 25 N/Sqmm
Tensile strength BS 6319 (P2): > 20 N/Sqmm
Shore D Hardness: > 70
Mixed Density: 1.53 g/cc (0.5 mm thickness), 1.57 g/cc (1 mm thickness)
Coverage:
Thickness 0.5 mm 1.0 mm
Coverage (approx.) 19.0 m² 10.5 m²
Pack Size: 14.50 kg & 16.50 kg
Ardex Endura