TEROSON AD KDS

Properties:

• Excellent adhesion without primer on most building materials
• UV- and weather-resistant
• Gap-bridging up to 20 mm
• Can be used down to -5 °C
• Strip position easily adjustable in the fresh adhesive bed

Approvals:

• EMICODE EC 1 Plus 

Technical descriptions:

• Material base: Silane-modified polymer
• Consistency: Paste-like, thixotropic
• Colour: Black
• Odour: Odourless
• Packaging: 570 ml in a tubular bag
• Density: (DIN 53 217, part 2) 1.5 g/cm³
• Skin formation time: (acc. to ISO 2091 at 23 °C & 50 % RH) Approx. 15 min
• Curing rate: (at 23 °C & 50 % RH) 2 mm/24 h
• Shore A hardness: (acc. to ISO 868) Approx. 25
• Tensile strength: (acc. to ISO 37) 0.8 MPa
• Elongation at break: (acc. ISO 8339-A) Approx. 250 %
• Modulus at 100% elongation: (acc. to ISO 8339-A) Approx. 0.5 MPa
• Paint adhesion: provided
• Application temperature: -5 °C to +40 °C
• Temperature resistance: (Short-term exposure up to 1h): -40 °C to +100 °C +120 °C
• Fire resistance: (acc. to DIN EN 13501-1) Class E

Installation instructions:

Apply strands of TEROSON AD KDS to the substrate using either a manual or a compressed air gun (pressure 0.5 to 5 bars). Afterwards, press the sealing strip into the adhesive paste while it is
still fresh and skin-free. Roll the strip over with a pressure roller. On very uneven substrates, TEROSON AD KDS can be used to fix the upper edge of the TEROSON FO 2 sealing strip and to seal it against water penetrating from behind.TEROSON AD KDS should not be used below -5 °C and not above +40 °C (air/substrate).