Rolling Service Doors Model 900

Wayne Dalton's Model 900 Rolling Service Door is ideal for jobs where an economical solution, as well as durability and strength are needed. This door offers flexibility in curtain materials with choices of galvanized steel, stainless steel, or aluminum.

Our Model 900 rolling service steel doors are composed of curved or flat-faced slats that provide a natural watershed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

Model 900 features a strong double-angle bottom bar designed for easy installation and does not require fasteners in the guide openings, so the bottom bar does not interfere with door operation.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.)

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Tekniset tiedot

Key Product Features
- Max Width: 14’*
- Max Height: 14’*
- Mounting: Face of wall or between jambs
- Operation: Manual push-up: chain hoist where door weight exceeds manual effort
- Curtain: 2" galvanized steel curved slats (#2 profile), primed gray, white, beige or brown; 24-gauge steel with alternating endlocks
- Locking: Slide bolts on manual operation; padlockable chain keeper with chain hoist (padlock not included)
- Bottom Bar: Galvanized steel double angle with weatherstrip
- Guides: G-guide design; steel factory painted black
- Brackets: 1/4" or 3/16" steel plates with permanently sealed ball bearings
- Counter Balance: Steel pipe of adequate size to restrict a maximum deflection of .033" per linear foot. Oil tempered, 20,000 cycle helical springs
- Hood: 24-gauge galvanized steel round hood; primed gray, white or beige
- Wind Load: Standard wind load rated with a minimum of 20 psf
*Larger sizes may be available. Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge. Consult factory for more information. 800-764-1457
Slat Profiles
No. 2 - Curved-faced single crown slat available in up to 20-gauge steel, 20-gauge stainless steel, or up to 18-gauge B&S aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1/8" on centers.
No 17 - Flat-faced slat in up to 20-gauge steel, 20-gauge stainless steel, or 16 B&S gauge aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1 7/8" on centers.
Secur-Vent® - Perforated slat provides optimal security and ventilation. Slat consists of 1/16" diameter hole offereing 20 to 25% open area over length of each slat. Available in No. 17 flat slat up to 14' wide x 12' high.

Tekniset tiedot

Yksilöity viiterolling-service-doors-model-900
TuoteperheCommercial Doors
TuoteryhmäRolling Doors
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-04-25
Painoksen numero1

Linkit

Liittyviä

Ensisijainen materiaaliTeräs
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaOvet - Teollisuusovet
IFC-luokitusOvi
CSI MasterFormat 2014 -koodi08 33 23
CSI MasterFormat 2014 -nimikeOverhead Coiling Doors
OmniClass-numero23-17 11 13 25
OmniClass-nimikeOverhead Metal Doors

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret