Mechanical Pit Leveler

DALTONDOCK™ MECHANICAL PIT LEVELER

INSTALLER FRIENDLY

Fast install with pit height adjusters that require no shimming in rear of pit
Adjusters quickly position the dock level with the building floor
The installer is safe and never under the leveler
New levelers ship with 4 steel fork loops bolted to the deck, which makes lifting from a truck easy and stable. The loops help with forklift placement into a pit from inside or outside the building, and helps to minimize levelers sliding while stacked on top of each other
Cut outs identify weld points to the curb angle for faster installation
Lifter arm is mounted to the rear of the frame instead of sitting on the pit floor. No shimming and welding under the lifter arm on pit floor needed

DURABLE DESIGN AND FINISH

Base frame is open all the way to the rear of the pit for easy access with no cross beams or places to trap debris
Strong C-channel design. Heavy duty multi-lug construction of the lip hinge
Deck design eliminates the transition angle, a frequent repair on many levelers
Deck hinge is fully supported across the entire width of the deck to enhance long term durability
Environmentally friendly durable powder coat finish

SMOOTH BUILDING-TO-TRUCK TRANSITION

Designed with an optimized beveled lip to minimize bumps, gaps and damage to cargo and material handling equipment providing a smooth path allowing forklifts to move quickly over the leveler
Reduces shocks and jolts to workers
Facilitates fast movement of material handling equipment and forklifts

EASY-TO-USE & ERGONOMIC

Release chain for deck operation is easy for workers to pull
The hold down is easy to operate
Leveler is well-balanced for quick, easy articulation and automatically maintains positive lip contact with trailer movements
For easy maintenance and cleaning, the snubber chain and safety brace are positioned at side edges of the pit

One Year Limited Warranty; Two Year Limited Warranty when Wayne Dalton door and Mechanical Pit Leveler purchased together.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Tekniset tiedot

ULTIMATE SAFETY
- Installers are never under the pit and stay safe
- Safety legs are easy to deploy
- Minimal bumps or gaps on deck/lip reduce trip hazards for workers
- Proprietary powder coat formulation on deck and lip surfaces is textured to provide enhanced traction and non-slip protection
DURABILITY, LOW MAINTENANCE, LOW DOWNTIME
- Heavy duty multi-lug construction of the lip hinge. It also helps sheds debris instead of trapping/grinding it between the lip/deck junction that can cause fatigue and maintenance issues. The lug construction also allows for easy lubrication of the hinge. Lip hinge pin floats to help prevent binding damage and allow easy removal
- Deck hinge is fully supported across the entire width of the deck, which spreads the load across the width of the deck instead of concentrating the load on just a few hinge points. This reduces load fatigue and contributes to long term durability
- Deck uses robust C-channel beams and heavy duty construction to withstand harsh dock punishment
- Minimal maintenance required due to lack of deck transition angle
- Durable powder coat provides an extremely durable finish, better corrosion protection and adhesion compared to wet paint
- Complies with ANSI MH30.1-2015 that includes rigorous load testing requirements
ENVIRONMENTALLY FRIENDLY
- Our powder coat process has fewer Voltage Organic Compounds (VOCs) and solvents compared to paint
- Overspray is recycled which reduces waste disposal issues compared to a traditional paint process
- The US Environmental Protection Agency (EPA) recommends powder coatings as a sustainable coating option
SERVICEABILITY AND INSTALLATION
- Open base frame creates generous space for service along the full length of the leveler, including the rear which is the most difficult area to reach for cleaning and a common collection point for debris
- Leveler main springs are tightened/loosened with one adjustment point conveniently located on lifter arm
- Field serviceable with easy to reach adjuster for main spring
- Serviceable lip and hinge pin can be removed without breaking welds
- Maintenance brace is easy to reach under the leveler and tethered so it never gets lost
- Grease fittings to lubricate deck hinge for smooth operation

Tekniset tiedot

Yksilöity viitemechanical-pit-leveler
TuoteperheLoading Dock Equipment
TuoteryhmäMechanical Pit Leveler
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-01-10
Painoksen numero1

Linkit

Liittyviä

Ensisijainen materiaaliJauhepinnoitettu teräs
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaLastauslaitteet - Huoltolavat
IFC-luokitusRamppi
Uniclass 2015 -koodiPr_65_80_23
Uniclass 2015 -kuvausDock levellers
CSI MasterFormat 2014 -koodi11 13 19.13
CSI MasterFormat 2014 -nimikeLoading Dock Levelers
OmniClass-numero23-23 23 00
OmniClass-nimikeLoading Dock Equipment

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret