Julkaise tuotteesi
VORT HR 450 AVEL D
Vortice

VORT HR 450 AVEL D

Galvanized and painted sheet steel enclosure. Aesthetic front panel made of plastic resin (ABS). Internal components made of EPP. Round duct connection ports, nominal diameter 160 mm. 2 EC (brushless) motors, external rotor, controlled at constant airflow, with shaft turning in ball bearings to grant a “maintenance free” functioning, each coupled to a forward curved centrifugal impeller; 4 speeds, independently adjustable at the installation. High efficiency counter-flow heat exchanger in PS resin. Automatic, 100% filtered, mechanic by-pass, granting people comfort in the rooms in mid-season or when the outside temperature does not require the action of the heat exchanger. Automatic frost-protection to prevent icing on the heat exchanger. 3 x ISO Coarse 90% (G4) filters, respectively on extraction, supply ports and for the by-pass. ePM10 50% (M5) and ePM1 55% (F7) filters available as optional per the supply port and for by-pass. Condense water tray with discharge pipes. Wired control panel with LCD display, which allows: to switch on / off the unit; the first set-up; to set the speed; to set the weekly timer; to monitor the correct product operation (any faults are shown on the display); to show the product functioning (speed set, by-pass status, defrosting activation, pre and/or post heaters activation if installed); to show the filters status. Brackets for wall-mounted installation supplied as standard. Possibility of connection to environmental external sensors (available as optional), for automatic functioning control. Possibility of integration in home automation environment through ModBus protocol.
Tekniset tiedot
  • Yksilöity viiteheatrecoveryunit_HR450AVEL-D
  • TuoteperheResidential
  • TuoteryhmäHeat recovery units
  • Julkaisupäivä2021-03-30
  • Painoksen numero1
  • Korkeus (mm)766
  • Leveys (mm)708
  • Syvyys (mm)480
Liittyviä
  • Ensisijainen materiaaliPolypropeeni
  • Toissijainen materiaaliTeräs
  • Suunniteltu:Italia
  • Valmistettu:Italia
  • Nettopaino (kg)40
Luokitus
  • BIMobject-luokkaLVI - Lämmöntalteenotto
  • OmniClass-numero23-39 43 17 23
  • OmniClass-nimikeWaste Heat Recovery Heat Exchangers

Alueellinen saatavuus

Aasia Eurooppa Oseania Afrikka Etelä-Amerikka Pohjois-Amerikka
Arabiemiirikunnat
Alankomaat
Australia
Algeria
Bolivia
Costa Rica
Azerbaidžan
Albania
Uusi-Seelanti
Burkina Faso
Chile
Panama
Bahrain
Belgia
Djibouti
Ecuador
Yhdysvallat
Filippiinit
Bosnia ja Hertsegovina
Egypti
Georgia
Bulgaria
Etelä-Afrikka
Hong Kong
Espanja
Etiopia
Indonesia
Islanti
Kamerun
Intia
Italia
Kenia
Iran
Itävalta
Libya
Israel
Kreikka
Madagaskar
Jordania
Kroatia
Mauritius
Kazakstan
Kypros
Nigeria
Kiina
Liettua
Sambia
Kuwait
Malta
Tunisia
Libanon
Moldova
Malesia
Montenegro
Mongolia
Norja
Qatar
Pohjois-Makedonia
Singapore
Portugali
Sri Lanka
Puola
Turkki
Ranska
Turkmenistan
Romania
Vietnam
Ruotsi
Saksa
Serbia
Slovakia
Slovenia
Suomi
Sveitsi
Tanska
Tsekin tasavalta
Ukraina
Valko-Venäjä
Venäjä
Viro
Yhdistynyt kuningaskunta