Legal-3 Unit-7 Tier 4 Post Shelving

7 Tiers High
Great for file storage
Flexible components for adaptable storage
Shelf system

The 4-Post line is designed to be highly flexible and adaptable with every Revit model built to reflect its real world counterparts as closely as possible. Use the prebuilt shelving family to visualize your storage solutions or use the shared sub-component families to build your own custom solution right down to the last shelf.Our 4-Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile-ready for easy conversion. Our 4-Post units are ready to assemble with no special tools required. Available depths make it an ideal choice for letter, legal, binder, and book storage applications.

Tekniset tiedot

UprightsFormed from steel sheet to a hollow “tee” shape for intermediate supports and formed angles for end supports. Uprights have keyhole slots on inner wall only. Provide with sheet steel panels full height and depth of end uprights. Provide intermediate “tee” uprights between adjacent units.Shelves and SupportsFormed from sheet steel with flanges on all sides and return hem on front and back flanges. Ends are formed to clear inside of upright offset panels. Shelves are independently adjustable. Shelf supports are formed from heavy gauge steel sheet with four solid steel shoulder rivets, two per ear, that interlock with inner wall of uprights.Nominal Shelf Dimensions
- Width: 12 inches (305MM) to 72 inches (1829MM) sections used to meet project requirements
- Shelf Edge Vertical Profile: 3/4 inch (19MM) maximum
- Vertical Adjustment Increment: 1-1/2 inches (38MM)
- Width Of Intermediate Uprights: 2 inches (51MM)
- Clearance Between Uprights: Nominal shelf section width minus 2 inches (51MM)
- Levelness of Completed Shelf Units: Maximum 1/8 inch (3.2MM) between bottom shelf and canopy top, measured along the edge of any upright in any direction
Accessories
- File dividers
- Center stops
- Reference shelves
- Back stops
- Laminate end panel
- End panel mounting brackets
- Backs
- Bin dividers
- Bin fronts
FinishesPaint finish, low pressure laminate, high pressure laminate, or acrylic finish.

Tekniset tiedot

Yksilöity viite4_Post_Legal_3_Unit_7_Tier_PCS
TuoteperheBusiness
TuoteryhmäAdministration, Mail Room, Storage, Break Room and Casework
TyyppiKokoonpano (useita objekteja)
Julkaisupäivä2021-01-29
Painoksen numero1

Linkit

Tuotteen urlhttps://fetchbim.com/catalog/product/view/id/2969

Liittyviä

Ensisijainen materiaaliJauhepinnoitettu teräs
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaKalusteet - Hyllyt & varasto
IFC-luokitusKaluste
OmniClass-numero23-21 11 11 11
OmniClass-nimikeCommercial Storage Shelves

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret