Julkaise tuotteesi
Protecta FR Damper
Protecta FR Damper
    Polyseam

    Protecta FR Damper

    Protecta® FR Damper is used to fire proof ventilation ducts which penetrate fire rated constructions such as fire compartments and fire walls; preventing the passage of fire and smoke (surrounding and inside the ventilation duct).

    The product consists of a steel casing and contains horizontal steel blades, treated with a technically advanced heat expanding graphite which closes off the whole damper in a fire. The aperture surrounding the dampers are fire sealed with Protecta fire stopping products.

    The damper can be installed in the fire seal and the ventilation ducting attached, or the damper can be connected to the ducting and then fire sealed.

    The aperture where the ducts pass through can include one or multiple ventilation ducts. One can also pass through other technical services such as cables, cable trays and pipes within the same aperture.

    Available in the following sizes: Ø63, Ø80, Ø100, Ø125, Ø160, Ø200, Ø250, Ø315, Ø400, Ø500, Ø630, Ø800, Ø1000 and Ø1250.

    Tekniset tiedot
      • Maintenance-free and no electrical connections necessary.
      • The same damper can be installed in drywalls, masonry and concrete walls, timber walls, concrete floors and timber floors.
      • An aperture can include several dampers and in addition, technical services such as cables, cable trays and pipes.
      • The product seals against penetration of fire and smoke, surrounding and inside the ventilation duct.
      • Closes in the area where the fire is located (but not elsewhere), allowing the ventilation system to extract smoke from areas that are not on fire.
      • Keeps the temperature in the duct network lower than 120°C, protecting fans and sensitive units in the system.
      • Insulation of ducts is not necessary.
      • Service life of more than 50 years; the damper will last the same life cycle as the ventilation system.
      • The dampers are designed to fit standard ducting equipment, enabling the ducting system installer to easily fit the dampers.
      • The dampers are attached to the inside of the ducts, giving the benefit of space-saving.
      • The dampers are only 15 cm long and bends can be connected right behind the fire seal (also available to order in other sizes).
      • The damper can be attached to a vent on one side.
    Tekniset tiedot
    • Yksilöity viiteProtecta_FR_Damper
    • TuoteperheProtecta
    • TuoteryhmäFR Damper
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2020-03-17
    • Painoksen numero1
    • Syvyys (mm)150
    Liittyviä
    • Ensisijainen materiaaliGalvanoitu teräs
    • Suunniteltu:Yhdistynyt kuningaskunta
    • Valmistettu:Yhdistynyt kuningaskunta
    Luokitus
    • BIMobject-luokkaTulituotteet - Palo-ovet
    • IFC-luokitusObjekti

    Alueellinen saatavuus

    Eurooppa
    Ahvenanmaa
    Alankomaat
    Albania
    Andorra
    Belgia
    Bosnia ja Hertsegovina
    Bulgaria
    Espanja
    Färsaaret
    Gibraltar
    Guernsey
    Huippuvuoret
    Irlanti
    Islanti
    Italia
    Itävalta
    Jersey
    Kreikka
    Kroatia
    Kypros
    Latvia
    Liechtenstein
    Liettua
    Luxemburg
    Malta
    Mansaari
    Moldova
    Monaco
    Montenegro
    Norja
    Pohjois-Makedonia
    Portugali
    Puola
    Ranska
    Romania
    Ruotsi
    Saksa
    San Marino
    Serbia
    Slovakia
    Slovenia
    Suomi
    Sveitsi
    Tanska
    Tsekin tasavalta
    Ukraina
    Unkari
    Valko-Venäjä
    Vatikaanivaltio
    Venäjä
    Viro
    Yhdistynyt kuningaskunta