Protecta FR Collar

Protecta^® FR Collars are designed to maintain the fire resistance of fire rated walls and floors where these are breached by service penetrations, and may be used in drywalls, timber, masonry or concrete walls and floors.

Each collar consists of a white or red coated circular steel shell that splits in two to fit around the service penetrations by means of a simple ’slide-lock’ system. The steel shell contains a graphite based reactive material which reacts when exposed to heat from fire closing the openings left by the softening combustible material.

Available in the following sizes:

Ø55/50mm, Ø82/50mm, Ø110/50mm, Ø125/60mm, Ø160/60mm, Ø200/75mm, Ø250/75mm and Ø315/75mm.

Tekniset tiedot

- Classified for fire sealing all types of constructions such as drywalls, masonry and concrete walls, concrete and composite floors, and solid or cross-laminated timber walls and floors.
- Classified for fire sealing all types of building service penetrations such as cable bundles, cable conduits, steel pipes, copper pipes, composite pipes, PVC pipes, PE pipes, ABS pipes, PP pipes and PEX pipe-in-pipes.
- Metal and plastic pipes are classified with commonly used elastomeric pipe insulations, continuous through the fire seal.
- Approved plastic pipe sizes range from smallest pipes available to Ø400mm, each with a wide range of pipe wall thicknesses.
- Approved with a single collar in some concrete and masonry wall applications, reducing cost.
- Collars are available in two different heights for different fire classifications to maximise cost-efficiency.
- Smaller pipes can be fitted within larger collars with the benefit of accommodating pipes that are at an angle, or if the opening around the pipe is too large.
- Fire classifications up to 240 minutes for both integrity and insulation.
- Tested and certified for U/U pipe end applications.
- Very high sound insulation (Rw 58 dB).
- Causes no deleterious effects on cPVC pipes like BlazeMaster, supported by mechanical testing evidence.
- No emissions - environmentally and user friendly.
- Simple to install using widely available standard fixings.
- 30 years working life guarantee.
- The product hold the following approval marks: CE-mark for Europe, UL-EU certificate for Asia and South America, UAE Certificate of Compliance for United Arab Emirates, AS Assessment for New Zealand and Australia.

Tekniset tiedot

Yksilöity viiteProtecta_FR_Collar
TuoteperheProtecta
TuoteryhmäFR Collar
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2020-03-17
Painoksen numero1

Linkit

Tuotteen urlhttps://www.protecta.co.uk/product/fr-collar/
Tekninen kuvaushttps://www.protecta.co.uk/wp-content/uploads/2021/02/Technical-Data-Sheet-2.pdf

Liittyviä

Ensisijainen materiaaliTeräs
Suunniteltu:Yhdistynyt kuningaskunta
Valmistettu:Yhdistynyt kuningaskunta

Luokitus

BIMobject-luokkaTulituotteet - Palo-ovet
IFC-luokitusObjekti

Alueellinen saatavuus

Eurooppa
Ahvenanmaa
Alankomaat
Albania
Andorra
Belgia
Bosnia ja Hertsegovina
Bulgaria
Espanja
Färsaaret
Gibraltar
Guernsey
Huippuvuoret
Irlanti
Islanti
Italia
Itävalta
Jersey
Kreikka
Kroatia
Kypros
Latvia
Liechtenstein
Liettua
Luxemburg
Malta
Mansaari
Moldova
Monaco
Montenegro
Norja
Pohjois-Makedonia
Portugali
Puola
Ranska
Romania
Ruotsi
Saksa
San Marino
Serbia
Slovakia
Slovenia
Suomi
Sveitsi
Tanska
Tsekin tasavalta
Ukraina
Unkari
Valko-Venäjä
Vatikaanivaltio
Venäjä
Viro
Yhdistynyt kuningaskunta