Julkaise tuotteesi
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System
NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System

    NanaWall® SL60 - The Standard Thermally Broken Aluminum Framed Folding System

    For precise, non-parametric 'static' Revit and IFC models, please check the 3D configurator under 'Links - Tendering Information'.

    The SL60 is a thermally broken aluminum folding panel system designed to provide an opening glass wall or storefront for openings up to 39' (12 mm) wide. It is available in various configurations utilizing one to twelve panels. Units can be either be inward-opening or outward-opening. It exists with a swing entry/exit panel(s); note the further panel size constraints with a swing panel not hinged to a side jamb. 

    This system is appropriate in residential and commercial applications where high level of resistance to air and water infiltration is desired. The SL60 is Florida statewide approved with Product Approval number FL37263. Also, the SL 60/o system is the top-hung system while the SL 60/u system is the floor-mounted system. 

    Tekniset tiedot
    • The maximum size limits shown are based on the weight of a panel that has a net glass thickness of not more than 10 mm (3/8”). For larger net glass thickness, this maximum size limit chart will not apply.

      For configurations with no swing panels, the minimum panel width needed is 2'1" (625 mm).

      For single glazing, a horizontal mullion is needed for all heights above 8'10" (2700 mm).

      For cornerless units, a horizontal mullion is needed for all heights above 8'4" (2550 mm). 

    Tekniset tiedot
    • Yksilöity viitenst45934
    • TuoteperheDoors
    • TuoteryhmäFolding Doors and Grilles
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2011-11-16
    • Painoksen numero1
    Liittyviä
    • Ensisijainen materiaaliAlumiini
    • Toissijainen materiaaliLasi
    Luokitus
    • BIMobject-luokkaOvet - Taitto-ovet
    • IFC-luokitusOvipaneeli
    • UNSPSC-nimiDoors
    • UNSPSC-koodi301715
    • Uniclass 2015 -koodiSs_25_30_20_78
    • Uniclass 2015 -kuvausSliding folding doorset systems
    • CSI MasterFormat 2014 -koodi08 35 13
    • CSI MasterFormat 2014 -nimikeFolding Doors
    • OmniClass-numero23-17 11 23 15
    • OmniClass-nimikeFolding All Glass Doors and Grilles
    • CSI UniFormat II -koodiB2030
    • CSI UniFormat II -nimikeExterior Doors

    Alueellinen saatavuus

    Pohjois-Amerikka
    Anguilla
    Antigua ja Barbuda
    Aruba
    Bahamasaaret
    Barbados
    Belize
    Bermuda
    Brittiläiset Neitsytsaaret
    Caribbean Netherlands
    Caymansaaret
    Costa Rica
    Curaçao
    Dominica
    Dominikaaninen tasavalta
    El Salvador
    Grenada
    Grönlanti
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaika
    Kanada
    Kuuba
    Martinique
    Meksiko
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts ja Nevis
    Saint Lucia
    Saint Vincent ja Grenadiinit
    Saint-Barthélemy
    Saint-Martin
    Saint-Pierre ja Miquelon
    Sint Maarten
    Trinidad ja Tobago
    Turks- ja Caicossaaret
    Yhdysvallat
    Yhdysvaltain Neitsytsaaret