i250 Commercial Tankless System - Wall Hung

i250 Commercial Tankless System - Wall Hung

Commercial Tankless on-demand water heater

KEY FEATURES

• Stainless (316L) Heat Exchanger
• Flexible-Floating Design, stress-relieving and thermal shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Tekniset tiedot

Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
Thermal Efficiency 92%
Energy Factor N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent (2” not allowed at elevations above 4,000 ft) N/A
Max 2” Vent Length - Two Pipe / Direct Vent (2” not allowed at elevations above 4,000 ft) N/A
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

Tekniset tiedot

Yksilöity viitei250
Tuoteperhei Series
TuoteryhmäCommercial Tankless System - Wall Hung
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2020-05-11
Painoksen numero1

Linkit

Tuotteen urlhttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i250-i-series/
Asennusohjeethttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Tuotesertifiointihttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Tekninen kuvaushttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii

Liittyviä

Ensisijainen materiaaliTeräs
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaLVI - Vedenlämmittimet
IFC-luokitusLämmönvaihdin
ETIM-koodiEC000392
ETIM-nimiInstantaneous water heater
UNSPSC-nimiCommercial water heaters
UNSPSC-koodi40101826
Uniclass 2015 -koodiPr_60_60_96
Uniclass 2015 -kuvausWater heaters
CSI MasterFormat 2014 -koodi23 00 00
CSI MasterFormat 2014 -nimikeHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass-numero23-31 29 11
OmniClass-nimikeInstantaneous Hot Water Heaters
CSI UniFormat II -koodiD3090
CSI UniFormat II -nimikeOther HVAC Systems & Equipment

Alueellinen saatavuus

Pohjois-Amerikka	Etelä-Amerikka
Anguilla	Guyana
Antigua ja Barbuda	Surinam
Aruba
Bahamasaaret
Barbados
Belize
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Curaçao
Dominica
Dominikaaninen tasavalta
Grenada
Guadeloupe
Haiti
Jamaika
Kanada
Kuuba
Martinique
Montserrat
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret