HörmannSeuraa

V 2012 – Supermarket, flexible high-speed door

Tekniset tiedot

Tekniset tiedot

• Door leaf: Curtain made of textile-reinforced UPVC, 1.5 mm thick. With spring steel wind locks in coloured curtain pockets. Optional version with transparent vision field. Surface: Curtain available in the 5 standard colours based on RAL 1018 Zinc yellow, RAL 2004 Pure orange, RAL 3002 Carmine red, RAL 5010 Gentian blue, RAL 7038 Agate grey. The curtain is partitioned into individual curtain sections with plastic sliders for stabilisation. Door guide: Self-supporting side guide rails made of canted, galvanized material. Barrel made of plastic, galvanized operator and shaft cover as standard. Door operation: Direct drive operator with operating current brake, integral catch safety device, digital limit switch, motor power 0.37 kW, connecting voltage 230 V, 50 Hz, protection category IP 54. Operator side right/left. Emergency opening via operating current brake and counter weights in case of power failure. Control BK 150 FU E 1, in plastic control box , IP 54, 1-phase, 230 V, size (W x H x D) = 230 x 460 x 200 mm, frequency converter, electronic travel limit setting, Open-Stop-Close membrane push button, main switch, emergency-off button, automatic timer and display. Connection cable with CEE plug and 3 volt-free contacts. Control of driveway via light grille. Monitoring height 350 mm, length 510 mm. Door travel speeds: Opening: approx. 1.2 m/s Closing: approx. 0.8 m/s Fitting: Professional fitting of a door including wiring as well as adjustment/alignment and test run on an existing base construction that is suitable for fitting the door. Application areas: Internal door, supermarket, industrial doors

Tekniset tiedot

Tekniset tiedot

• Yksilöity viite952
• TuoteperheIndustrial doors
• TuoteryhmäHigh-speed doors
• Julkaisupäivä2021-01-07
• Painoksen numero1
• Korkeus (mm)2500
• Leveys (mm)2500

Linkit

Linkit

• Tuotteen urlhttps://architektenprogramm.hoermann.de/HAP/entry.php

Liittyviä

Liittyviä

• Ensisijainen materiaaliPVC
• Toissijainen materiaaliGalvanoitu teräs
• Suunniteltu:Saksa
• Valmistettu:Saksa

Luokitus

Luokitus

• BIMobject-luokkaOvet - Teollisuusovet
• IFC-luokitusOvi
• UNSPSC-nimiDoors
• UNSPSC-koodi301715
• Uniclass 2015 -koodiSs_25_30_20_40
• Uniclass 2015 -kuvausIndustrial doorset systems
• OmniClass-numero23-17 11 17 25 11
• OmniClass-nimikeRoller Shutter Overhead Plastic Doors
• CSI UniFormat II -koodiC1020
• CSI UniFormat II -nimikeInterior Doors