HB638 Sliding Door Lock - 55mm Backset with Integrated Pull

The HB638 Series provides various locking configurations with the addition of a finger pull in the forend of the lock body.

The HB638 Set comes with a key and snib flush pull to both sides of the door. Cylinders can be ordered separately with confirmation of the door thickness.

Please note that the “HB630 Series” denotes the type of lock body used with various flush pull configurations. The “HB630” set has a key and snib both sides, and is one possible configuration in the series.

Material: Diecast zinc with brass and 316 stainless steel

Backset : 55mm

Minimum door thickness : 38mm

Flush pulls : 250mm x 36mm x 13mm

Suitable for timber or aluminum doors with wide stiles.

Tekniset tiedot

For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
Configurations:
HB 638 – Key and Snib Both Sides
HB 637 – Key Snib In, Blank Out
HB 636 – Key Snib In, No Pull Out

Available Finishes
Brushed Nickel, Brushed Satin Chrome, Oil Rubbed Bronze, Electro Black Ace, Electro Dark Bronze, Electro Medium Bronze, Electro Flat White, Matt Black Chrome, Polished Brass, Polished Chrome, Polished Nickel, Satin Chrome, Appliance White

Tekniset tiedot

Yksilöity viitehb638-sliding-door-lock-55mm-backset-with-integrated-end-pull
TuoteperheSliding Door Hardware
TuoteryhmäLocks and Sliding Lock Sets
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2023-04-26
Painoksen numero1

Linkit

Luokitus

BIMobject-luokkaOvet - Hardware

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret