Julkaise tuotteesi
PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System
PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System
PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System
PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System
    GCP

    PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System

    PREPRUFE® Plus waterproof membranes are composite sheets comprising a robust virgin HDPE backing, a pressure sensitive adhesive and a trafficable weather resistant coating with dual adhesive PREPRUFE® ZipLap™ for increased security and practicability at overlap. With their Advanced Bond Technology™, the membranes develop a continuous adhesive bond to concrete poured on or against it, preventing water migration between the structure and the membrane, significantly improving protection against leaks.

    Tekniset tiedot
    • Integrally bonded HDPE sheet waterproofing with dual adhesive laps for pre-applied waterproofing applications for installation below slab. Basis of design is PREPRUFE® 300R Plus by GCP Applied Technologies. 

      Membrane shall be 1.2mm thick, uniform, flexible sheets consisting of 0.8mm thick, HDPE sheet coated with a pressure-sensitive adhesive, a trafficable weather resistant coating.  
      The membrane shall have a kick-out roll function to facilitate ease of application and shall have no release liner to reduce the environmental impact. Continuity between adjacent sheets shall be assured with dual adhesive laps. The membrane shall form an integral and permanent bond to placed concrete to prevent water migration at the interface of the membrane and structural concrete.  
      The membrane shall be chemically resistant and protect the structure from salt and sulphate attack. It shall have been proven to be tested to a resist a minimum lateral water migration of 70m head of water (686kpa), at the membrane concrete interface and have a zero permeance to moisture, it will not activate prematurely due to wet conditions and is unaffected by ground settlement beneath slabs.

    Tekniset tiedot
    • Yksilöity viitePreprufe-Plus_Preprufe-800PA_Waterproofing_System
    • TuoteperheWaterproofing
    • TuoteryhmäBelow Ground Applications
    • TyyppiRakennusmateriaalit
    • Julkaisupäivä2019-03-28
    • Painoksen numero1
    Liittyviä
    • Ensisijainen materiaaliPolyetyleeni
    • Suunniteltu:Yhdysvallat
    • Valmistettu:Yhdysvallat
    Luokitus
    • BIMobject-luokkaRakennusmateriaalit - Waterproofing & Membranes
    • IFC-luokitusRakennuselementti
    • Uniclass 2015 -koodiPr_25_57_65_60
    • Uniclass 2015 -kuvausPlastics sheets

    Alueellinen saatavuus

    Eurooppa
    Alankomaat
    Albania
    Andorra
    Belgia
    Bosnia ja Hertsegovina
    Bulgaria
    Espanja
    Islanti
    Italia
    Itävalta
    Kreikka
    Kroatia
    Kypros
    Latvia
    Liechtenstein
    Liettua
    Luxemburg
    Malta
    Moldova
    Monaco
    Montenegro
    Norja
    Pohjois-Makedonia
    Portugali
    Puola
    Romania
    Ruotsi
    Saksa
    San Marino
    Serbia
    Slovakia
    Slovenia
    Suomi
    Sveitsi
    Tanska
    Tsekin tasavalta
    Ukraina
    Unkari
    Valko-Venäjä
    Vatikaanivaltio
    Venäjä
    Viro
    Yhdistynyt kuningaskunta