GENIALE SEISMIC COAT 10+4CSE25

The Geniale Ecosism® Seismic Coat is an innovative technological solution that, through a combined intervention that maximizes the benefit / cost ratio, allows both seismic safety and energy efficiency of existing buildings according to current regulations. As indicated by the name itself, the Geniale Seismic Coat, applied to the outside of the building to provide it with a new seismic-resistant "skin", is made up of a thin slab of reinforced concrete cast in place inside two layers of material customizable insulation. The casting, suitably sized at the design stage, is made integral with the existing structure by inserting appropriate anchors which, arranged at the level of the foundations and the floor curbs, guarantee maximum collaboration between the new system and the structure itself. Thanks to the use of the galvanized steel mesh characteristic of Ecosism®, the system is supplied with the pre-assembled insulation and with guides for the correct installation of the already prepared structural reinforcements, thus allowing to minimize operations and scraps of construction site. Furthermore, to improve the bending behavior of the sheet and reduce the risk of instability outside the plane, it is possible to provide for the creation of appropriate horizontal and vertical reinforcement ribs. Finally, thanks to the particular conformation of the galvanized steel wire mesh, it is possible to create a particularly solid traditional plaster finish layer that guarantees maximum protection of the insulating material against impacts and weather events. The Geniale seismic coat is produced to measure on the basis of the architectural survey in situ and according to the structural project developed by the technician in charge. The panels of the Seismic Coat, produced with a height equal to that of the floor of the structure, faithfully follow the elevations of the building (preparation of the forometries during the production phase) and can be customized by using different types of insulating material. The Seismic Coat can be designed for different levels of increase in seismic and energy performance, depending on both the thickness and the materials used. To this end, by adopting specific products such as rock wool, it is possible to guarantee both an improvement in energy performance and an increase in the acoustic insulation and fire resistance of the building. The patent, validated by cyclical tests on full-scale samples, was conceived and developed in collaboration with the University of Padua (ICEA Department).

Tekniset tiedot

ADVANTAGES EFFICIENCY: the Seismic Coat allows to achieve two results simultaneously, reducing the processing phases and, consequently, the realization times MINIMUM INVASIVITY: The Seismic Coat is made only on the external surface of the building, ensuring its continuity of use even during application, unlike most of the seismic improvement / adaptation systems on the market today. OPTIMIZATION: The Seismic Coat does not require formwork, since the layers of insulation also have the function of containing the cast of structural concrete created on site. ECONOMICITY AND GUARANTEE: by proposing a unique solution for improving the energy and seismic performance of the building, you have the possibility of entrusting the work to a single company, it does not have to be carried out at a later date and allows you to keep the construction costs down and have the guarantee of the result. PRECISION: The Ecosism® metal mesh allows to ensure the correct positioning of the reinforcement bars within the concrete layer. In this way, even if the thickness is reduced, an adequate concrete cover can be guaranteed. CUSTOMIZATION: Possibility of customer choice of a customized insulation package both as regards insulation materials and thickness, according to requirements. FINISHING: Thanks to the particular conformation of the metal mesh, it is possible to create a finish with reinforced, solid and impact-resistant plaster that will protect the insulation for the entire useful life of the structure. QUICKNESS: The Seismic Coat is produced in the factory in large modules, in this way speed and precision of installation are increased and waste and scraps are eliminated. BREATHABILITY: The cracks between the slices of insulation created by the presence of the metal mesh guarantee the breathability of the wall and do not affect energy performance (certified by testing in a hot chamber).

Tekniset tiedot

Yksilöity viite10_4CSE25
TuoteperheIFC INSULATED CONCRETE FORMS
TuoteryhmäCAPPOTTO SISMICO
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2020-03-12
Painoksen numero1

Linkit

Tuotteen urlhttp://www.ecosism.com/moduli/geniale/
Asennusohjeethttps://www.ecosism.com/download-cataloghi/
Esittelyvideohttps://www.youtube.com/embed/NHUpQUzoY3M?rel=0&controls=1&showinfo=0;autoplay=6
Tekninen kuvaushttp://www.ecosism.com/moduli/geniale/

Liittyviä

Ensisijainen materiaaliEPS
Suunniteltu:Italia
Valmistettu:Italia

Luokitus

BIMobject-luokkaSeinät - Ulkoseinät
IFC-luokitusSeinä
UNSPSC-nimiStructural components and basic shapes
UNSPSC-koodi3010
Uniclass 2015 -koodiEF_25
Uniclass 2015 -kuvausWall and barrier elements
CSI MasterFormat 2014 -koodi03 11 19
CSI MasterFormat 2014 -nimikeInsulating Concrete Forming
OmniClass-numero23-13 31 17 17
OmniClass-nimikeInsulated Concrete Forms
CSI UniFormat II -koodiB2010
CSI UniFormat II -nimikeExterior Walls

Alueellinen saatavuus

Eurooppa
Ahvenanmaa
Alankomaat
Albania
Andorra
Belgia
Bosnia ja Hertsegovina
Bulgaria
Espanja
Färsaaret
Gibraltar
Guernsey
Irlanti
Islanti
Italia
Itävalta
Jersey
Kreikka
Kroatia
Kypros
Latvia
Liechtenstein
Liettua
Luxemburg
Malta
Mansaari
Moldova
Monaco
Montenegro
Norja
Pohjois-Makedonia
Portugali
Puola
Ranska
Romania
Ruotsi
Saksa
San Marino
Serbia
Slovakia
Slovenia
Suomi
Sveitsi
Tanska
Tsekin tasavalta
Ukraina
Unkari
Valko-Venäjä
Vatikaanivaltio
Viro
Yhdistynyt kuningaskunta