Julkaise tuotteesi
ASSA ABLOY DL6220ST Stepdock

ASSA ABLOY DL6220ST Stepdock

The ASSA ABLOY DL6220ST stepdock is a dock leveler that provides increased efficiency and safety for the docking process. Unlike conventional docking systems, the dock leveler is placed behind a well-insulated sectional door. In closed position, it is very well sealed off from below, preventing cold or hot air access. The design was specifically developed to let a truck dock to the loading bay with closed rear doors. First the truck is put in the right position and then preferably an inflatable dock shelter seals off the loading bay before the sectional door is opened. The last step of the complete dock-in procedure is that the rear doors of the truck are opened. This sequence "dock first – open the rear doors later" provides a number of benefits: saving of energy, improving working conditions in particular for the truck driver, increasing safety of people / goods, and improving the efficiency of the docking process.

Tekniset tiedot
  • Features

    • Leveler height: 700 mm
    • Nominal length*: 2500, 3000 mm
    • Nominal width: 2000, 2200mm
    • Vertical working range
      • Rise above dock: up to 420 mm
      • Fall below dock: down to 450 mm
    • Platform tear plate: 6 mm (6/8)

    Performance

    • Load capacity: 60kN (6 tonnes)
    • Motor hydraulic unit: 1,5 kW
    • Mains supply: 400V 3-phase, 230V 3-phase
    • Control unit protection class: IP54
    • Allowable oil types:
      • ASSA ABLOY standard hydraulic oil (-15°C - +60°C)
      • ASSA ABLOY low temperature hydraulic oil (-30°C - +60°C)
    • Magnetic valves: 24V/DC 18W S1
    • Surface treatment paint class 1: 80 μm C2 M acc. DIN EN ISO 12944-2
    • Surface treatment paint class 3: 160 μm C3 M acc. DIN EN ISO 12944-2
    • Surface treatment galvanised: Hot dip galvanised 80 µm Corrosive category C4 & C5-I M acc. DIN EN ISO 12944-2

    * Other sizes are available on request

Tekniset tiedot
  • Yksilöity viiteassa-abloy-dl6220st
  • TuoteperheDocking
  • TuoteryhmäLevelers
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2024-07-10
  • Painoksen numero1
Liittyviä
  • Ensisijainen materiaaliTeräs
Luokitus
  • BIMobject-luokkaLastauslaitteet - Huoltolavat
  • IFC-luokitusRamppi
  • Uniclass 2015 -koodiPr_65_80_23
  • Uniclass 2015 -kuvausDock levellers
  • CSI MasterFormat 2014 -koodi11 13 19.13
  • CSI MasterFormat 2014 -nimikeLoading Dock Levelers
  • OmniClass-numero23-23 23 13
  • OmniClass-nimikeDock Levelers

Alueellinen saatavuus

Eurooppa Aasia Afrikka
Ahvenanmaa
Afganistan
Algeria
Alankomaat
Arabiemiirikunnat
Angola
Albania
Bahrain
Benin
Andorra
Irak
Botswana
Belgia
Iran
Burkina Faso
Bosnia ja Hertsegovina
Israel
Burundi
Bulgaria
Jemen
Djibouti
Espanja
Jordania
Egypti
Färsaaret
Kuwait
Eritrea
Gibraltar
Libanon
Etelä-Afrikka
Guernsey
Oman
Etelä-Sudan
Huippuvuoret
Palestiinalaisalueet
Etiopia
Irlanti
Qatar
Gabon
Islanti
Saudi-Arabia
Gambia
Italia
Syyria
Ghana
Itävalta
Turkki
Guinea
Jersey
Guinea-Bissau
Kreikka
Kamerun
Kroatia
Kap Verde
Kypros
Kenia
Latvia
Keski-Afrikan tasavalta
Liechtenstein
Komorit
Liettua
Kongo
Luxemburg
Kongon demokraattinen tasavalta
Malta
Länsi-Sahara
Mansaari
Lesotho
Moldova
Liberia
Monaco
Libya
Montenegro
Madagaskar
Norja
Malawi
Pohjois-Makedonia
Mali
Portugali
Marokko
Puola
Mauritania
Ranska
Mauritius
Romania
Mayotte
Ruotsi
Mosambik
Saksa
Namibia
San Marino
Niger
Serbia
Nigeria
Slovakia
Norsunluurannikko
Slovenia
Päiväntasaajan Guinea
Suomi
Reunion
Sveitsi
Ruanda
Tanska
Saint Helena
Tsekin tasavalta
Sambia
Ukraina
São Tomé ja Príncipe
Unkari
Senegal
Valko-Venäjä
Seychellit
Vatikaanivaltio
Sierra Leone
Venäjä
Somalia
Viro
Sudan
Yhdistynyt kuningaskunta
Swasimaa
Tansania
Togo
Tsad
Tunisia
Uganda
Zimbabwe