ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar

ARDEX X 3™ PLUS is a polymer-modified, mortar for setting quarry, ceramic and most natural stone tiles over common interior surfaces, including exterior-grade plywood, as well as over exterior concrete and masonry surfaces.

Key Features

Formulated for large and heavy tile and stone and ungauged thicknesses
Use for setting porcelain, quarry, ceramic and most natural stone* tiles
Use with uncoupling and anti-fracture membranes
For thicker bond coats: 3/32” to 1/2” (2.5 mm to 12 mm) after tile is embedded
Non-sag – for use on walls and floor
Minimizes slump
Easy to apply creamy consistency
Interior and exterior use
3-hour pot life

Standards

SystemOne™
Meets or exceeds ANSI 118.4
Meets or exceeds ANSI 118.11
ISO Classification: C2 TE P1

Tekniset tiedot

Installation
Mixing Ratio: 5 1/4 – 6 quarts (4.7 – 5.6 L) of water per 40 lb. (18 kg) bag
For smaller batches, use 2.5 parts powder to 1 part water by volume
Approximate Coverage per 40 lb. (18 kg) bag:
1/4” x 1/4” x 1/4” Sq. Notch Trowel; 90 sq. ft. (8.4 sq. m)
1/4” x 3/8” x 1/4” Sq. Notch Trowel; 65 sq. ft. (6 sq. m)
1/2” x 1/2” x 1/2” Sq. Notch Trowel; 45 sq. ft. (4.2 sq. m)
Performance
Open Time: Up to 30 minutes
Pot Life: 3 hours
Working Time: 15 – 30 minutes
Time to Grout: Walls: 8 hours; Floors: 24 hours
Colors: Gray/White
VOC: 0
Packaging: 40 lb. (18 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies. Also eligible for the ARDEX SystemOne™ Warranty when used in conjunction with ARDEX grouts and ARDEX caulks.

Tekniset tiedot

Yksilöity viiteARDEX-X-3-plus
TuoteperheTile & Stone Installation System
TuoteryhmäThin Set Mortar
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-06-20
Painoksen numero1

Linkit

Tuotteen urlhttps://www.ardexamericas.com/product/ardex-x-3-plus/
Tekninen kuvaushttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2020/09/ARDEX-X-3-PLUS-Technical-Data.pdf

Liittyviä

Ensisijainen materiaaliSementti
Suunniteltu:Turkki
Valmistettu:Saksa

Luokitus

BIMobject-luokkaLattiat - Tiles
IFC-luokitusFloor
UNSPSC-nimiStone or tile flooring
UNSPSC-koodi30161706
Uniclass 2015 -koodiSs_30_42_72
Uniclass 2015 -kuvausResilient and textile floor covering systems
CSI MasterFormat 2014 -koodi09 65 19
CSI MasterFormat 2014 -nimikeResilient Tile Flooring
OmniClass-numero23-15 17 13 13
OmniClass-nimikeTile Flooring
CSI UniFormat II -koodiC3020
CSI UniFormat II -nimikeFloor Finishes

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret