ARDEX TL 1400™ Self-Leveling Underlayment

The easy way to achieve an optimal smooth, flat surface for installing tile, especially when installing large and super format tile and stone!

ARDEX TL 1400™ is a blend of Portland cements, hydraulic cements and specialty polymers formulated to smooth substrates including concrete, terrazzo, tile, epoxy coatings and non-water soluble adhesive residue on concrete prior to installing tile and other floor coverings on, above and below grade.

Key Features

For smoothing substrates prior to tiling over interior concrete, terrazzo, tile, epoxy coatings and non-water-soluble adhesive residue over concrete
Installs up to 1 1/4″ (3 cm) neat
Can be tapered to meet existing elevations
Walk on in 2 to 3 hours; Install tile in 6 hours
Interior use only

Standards

SystemOne™

Tekniset tiedot

Installation
Mixing Ratio:
5 quarts (4.75 L) of water per 50 lb. (22.7 kg) bag
Coverage:
25 sq. ft. per bag at 1/4” (2.3 sq. m at 6 mm). Coverage will vary depending on the texture of the surface being smoothed.
Performance
Flow Time: 10 minutes
Initial Set (ASTM C191): Approx. 30 minutes
Final Set (ASTM C191): Approx. 90 minutes
Compressive Strength (ASTM C109/mod – Air cure only): 4500 psi (315 kg/cm²) at 28 days
Flexural Strength (ASTM C348): 1000 psi (70 kg/cm²) at 28 days
Walkable: 2 to 3 hours
Install Flooring: Tile in 6 hours; other floor coverings see Installation of Flooring section in the Technical Data.
VOC: 0
Packaging: 50 lb. (22.7 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened
Warranty: ARDEX, L.P. Standard Limited Warranty applies. Also eligible for the ARDEX Tile and Stone Installation Systems SystemOne™ Warranty.

Tekniset tiedot

Yksilöity viiteARDEX-TL-1400
TuoteperheSubfloor Preparation
TuoteryhmäSelf-Leveling Underlayment
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-06-20
Painoksen numero1

Linkit

Tuotteen urlhttps://www.ardexamericas.com/product/ardex-tl-1400/
Tekninen kuvaushttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2020/01/ARDEX-TL-1400-Technical-Data-1.pdf

Liittyviä

Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaLattiat - Pohjustus
IFC-luokitusFloor
UNSPSC-nimiCarpet or rug underlays
UNSPSC-koodi30161719
Uniclass 2015 -koodiPr_35_31_06_80
Uniclass 2015 -kuvausSmoothing and levelling underlay compounds
CSI MasterFormat 2014 -koodi06 16 26
CSI MasterFormat 2014 -nimikeUnderlayment
OmniClass-numero23-15 17 11 13 11 13
OmniClass-nimikePortland Cement Floor Underlayments
CSI UniFormat II -koodiB1010
CSI UniFormat II -nimikeFloor Construction

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret