ARDEX K 10 - Reactivatable™, High-Flow, Self-Leveling Underlayment

Choose Reactivatable™ ARDEX K 10™ is a reactivatable, high-flow, self-leveling underlayment that is used to smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete prior to the installation of finished flooring – on, above or below grade. Key Features Reactivatable, high-flow material with long healing time Use to smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete A blend of Portland cement and other hydraulic cements Installs up to 1/2″ (12 mm) neat Can be tapered to meet existing elevations Walkable in 2-3 hours Install moisture-insensitive tile and stone after 6 hours, most other floor coverings after 24 hours (see Installation of Flooring section in Technical Data Sheet for details) Interior use only Standards SystemOne Tested in Accordance with ASTM C1708

Tekniset tiedot

Installation Mixing Ratio: 5.25 quarts (4.97 L) of water per 50 lb. (22.7 kg) bag Coverage: 25 sq. ft. per bag at 1/4” (2.32 sq. m at 6 mm) 50 sq. ft. per bag at 1/8’’ (4.65 sq. m at 3 mm) Coverage will vary depending on the texture of the surface being smoothed. Performance Flow Time: Up to 25 minutes Compressive Strength (ASTM C109/mod – air cure only): 4,700 psi (329 kg/sq. cm.) at 28 days Flexural Strength (ASTM C348): 1,000 psi (70 kg/sq. cm.) at 28 days Walkable: 2 to 3 hours Install Flooring: See installation of flooring section in the Technical Data VOC: 0 Packaging: 50 lb. (22.7 kg) bag Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Shelf Life: 1 year, if unopened Warranty: ARDEX L.P. Standard Limited Warranty applies. Also eligible for the ARDEX/HENRY SystemOne™ warranty when used in conjunction with select HENRY® flooring adhesives.

Tekniset tiedot

Yksilöity viiteARDEX-K-10
TuoteperheSubfloor Preparation
TuoteryhmäSelf-Leveling Underlayment
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2019-11-07
Painoksen numero1

Linkit

Tuotteen urlhttps://www.ardexamericas.com/product/ardex-k-10/
Asennusohjeethttps://www.ardexamericas.com/product/ardex-k-10/
Esittelyvideohttps://www.youtube.com/watch?v=ZoDmh1aqbFg
Tekninen kuvaushttps://www.ardexamericas.com/product/ardex-k-10/

Liittyviä

Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaLattiat - Pohjustus
IFC-luokitusFloor
UNSPSC-nimiCarpet or rug underlays
UNSPSC-koodi30161719
Uniclass 2015 -koodiPr_35_31_06_80
Uniclass 2015 -kuvausSmoothing and levelling underlay compounds
CSI MasterFormat 2014 -koodi06 16 26
CSI MasterFormat 2014 -nimikeUnderlayment
OmniClass-numero23-15 17 11 13 11 13
OmniClass-nimikePortland Cement Floor Underlayments
CSI UniFormat II -koodiB1010
CSI UniFormat II -nimikeFloor Construction

Alueellinen saatavuus

Pohjois-Amerikka	Oseania
Anguilla	Uusi-Seelanti
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret