Julkaise tuotteesi
ARDEX ERM - Exterior Ramp Mortar
ARDEX ERM - Exterior Ramp Mortar
    ARDEX

    ARDEX ERM - Exterior Ramp Mortar

    ARDEX ERM™ Exterior Ramp Mortar is a trowel-grade, polymer-modified Portland cement-based, structural repair mortar for deteriorated exterior and interior concrete above, on or below grade. It has a corrosion inhibitor built-in to protect reinforcing steel. Key Features Integral corrosion inhibitor Easy to apply Mixes with water only Installs from 1/4” – 2” (6 mm – 5.1 cm) neat and up to 8” (20.3 cm) when extended with aggregate Freeze-thaw resistant Suitable for normal service commercial, institutional and multi-unit residential applications Use for exterior and interior concrete repair
    Tekniset tiedot
    • Installation
      Mixing Ratio: 6 1/2 pints (3.08 L) of water per 55 lb. (25 kg) bag
      Coverage: 0.46 cu. ft. per 55 lb. bag (0.01 m3 per 25 kg bag); 22 sq. ft. per 55 lb. bag at 1/4”; (2.04 m2 per 25 kg bag at 6 mm)

      Performance
      Compressive Strength (ASTM C109): 7 days 7000 psi; 490 kg/sq. cm; 28 days 8200 psi; 574.0 kg/sq. cm
      Flexural Strength (ASTM C293): 7 days 1200 psi; 84 kg/sq. cm; 28 days 1500 psi; 105 kg/sq. cm
      Modulus of Elasticity ASTM C469): 28 days 3.67 x 106 psi; 2.6 x 105 kg/sq. cm
      Length Change (ASTM C157): 7 days 0.06%; 28 days 0.08%
      Rapid Chloride Permeability (ASTM C1202, 28 days): 820 coulombs
      Pot Life / Working Time: 25 – 45 minutes
      Time to Traffic: Light foot 2 – 4 hours; Normal foot 3 days; Full, including rolling loads 5 – 7 days
      Coat or Seal (Minimum): 3 – 7 days
      Color: Gray
      Packaging: 55 lb. (25 kg) bag
      Storage: Store in a cool dry area. Do not leave bags exposed to direct sunlight. Keep from freezing.
      Shelf Life: 1 year, if unopened.
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    Tekniset tiedot
    • Yksilöity viiteARDEX-ERM
    • TuoteperheConcrete Repair
    • TuoteryhmäExterior Ramp Mortar
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2019-11-07
    • Painoksen numero1
    Liittyviä
    • Suunniteltu:Yhdysvallat
    • Valmistettu:Yhdysvallat
    Luokitus
    • BIMobject-luokkaRakennusmateriaalit - Betoni
    • UNSPSC-nimiInterior finishing materials
    • UNSPSC-koodi3016
    • CSI MasterFormat 2014 -koodi09 93 23.53
    • CSI MasterFormat 2014 -nimikeInterior Finishing
    • OmniClass-numero23-15 00 00
    • OmniClass-nimikeInterior and Finish Products
    • CSI UniFormat II -koodiC30
    • CSI UniFormat II -nimikeINTERIOR FINISHES

    Alueellinen saatavuus

    Pohjois-Amerikka
    Anguilla
    Antigua ja Barbuda
    Aruba
    Bahamasaaret
    Barbados
    Belize
    Bermuda
    Brittiläiset Neitsytsaaret
    Caribbean Netherlands
    Caymansaaret
    Costa Rica
    Curaçao
    Dominica
    Dominikaaninen tasavalta
    El Salvador
    Grenada
    Grönlanti
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaika
    Kanada
    Kuuba
    Martinique
    Meksiko
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts ja Nevis
    Saint Lucia
    Saint Vincent ja Grenadiinit
    Saint-Barthélemy
    Saint-Martin
    Saint-Pierre ja Miquelon
    Sint Maarten
    Trinidad ja Tobago
    Turks- ja Caicossaaret
    Yhdysvallat
    Yhdysvaltain Neitsytsaaret