Julkaise tuotteesi
Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity
Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity

    Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity

    The Master-Fit® BTR series with automatic flue damper provides outstanding performance and maximum installation flexibility for both new construction and replacement applications. Multiple options for placement of water connections and low installation clearances are additional installer-friendly features.
    • Effikal automatic flue damper minimizes standby heat loss to achieve 80% thermal efficiency
    • Inlet/outlet connections located top, front and rear for greater installation flexibility
    • Space-saving units are up to one foot shorter than models they replace
    • Installs standalone, manifolded or connected to storage tanks
    Tekniset tiedot
    • (Natural or Propane) gas water heater(s) shall be A. O. Smith Master-Fit® model # _____________ or equal, with a storage capacity of __________ gallons, an input rating of ___________________ BTUs per hour, a recovery rating of_________ gallons per hour (gph) at 100ºF rise and a maximum hydrostatic working pressure of 160 psi. Water heater(s) shall be protected against overheating caused by the buildup of scale, film and other sediment by a self-cleaning device, positioned inside the tank so that it directs the flow of inlet water to keep precipitated solids in suspension so that they are removed from the water heater on that or successive draws. Glasslined water heater(s) shall also be protected against electrolytic corrosion by multiple factory-installed anode rods. In addition, water heater(s) shall: 1) Be equipped with an integrated control system consisting of a 180ºF adjustable thermostat with upper and lower sensing bulbs. 2) Be equipped with intermittent electronic ignition, a manual reset gas shutoff device, a gas pressure regulator, factory-installed, CSA Certified and ASME Rated T&P relief valve and 2-3/4˝ x 3-3/4˝ tank inspection port. 3) Be design-certified by UL (Underwriters Laboratories) to current edition of ANSI Z.21.10.3 - CSA 4.3 standards governing storage-type water heaters. 4) Meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and Current Edition of ASHRAE/ IESNA 90.1. 5) Have a 3-year limited warranty against corrosion as outlined in the written warranty.
    Tekniset tiedot
    • Yksilöity viiteaosmith-btr
    • TuoteperheStorage Water Heaters
    • TuoteryhmäMaster-Fit
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2017-10-16
    • Painoksen numero1
    Liittyviä
    • Ensisijainen materiaaliTeräs
    • Suunniteltu:Yhdysvallat
    • Valmistettu:Yhdysvallat
    Luokitus
    • BIMobject-luokkaLVI - Vedenlämmittimet
    • Uniclass 2015 -koodiPr_60_60_96_34
    • Uniclass 2015 -kuvausGas-fired storage water heaters
    • CSI MasterFormat 2014 -koodi22 34 36
    • CSI MasterFormat 2014 -nimikeCommercial Gas Domestic Water Heaters
    • OmniClass-numero23-31 29 13 13
    • OmniClass-nimikeHot Water Tank Gas Heaters

    Alueellinen saatavuus

    Pohjois-Amerikka
    Anguilla
    Antigua ja Barbuda
    Aruba
    Bahamasaaret
    Barbados
    Belize
    Bermuda
    Brittiläiset Neitsytsaaret
    Caribbean Netherlands
    Caymansaaret
    Costa Rica
    Curaçao
    Dominica
    Dominikaaninen tasavalta
    El Salvador
    Grenada
    Grönlanti
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaika
    Kanada
    Kuuba
    Martinique
    Meksiko
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts ja Nevis
    Saint Lucia
    Saint Vincent ja Grenadiinit
    Saint-Barthélemy
    Saint-Martin
    Saint-Pierre ja Miquelon
    Sint Maarten
    Trinidad ja Tobago
    Turks- ja Caicossaaret
    Yhdysvallat
    Yhdysvaltain Neitsytsaaret