Julkaise tuotteesi
Lightweight Stainless Steel Double Check Detector Type II Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 30/30G
Lightweight Stainless Steel Double Check Detector Type II Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 30/30G

    Lightweight Stainless Steel Double Check Detector Type II Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 30/30G

    Ames Deringer™ 30 and 30G Double Check Detector Type II Assemblies are designed to prevent non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions. Deringer 30 features integral Eccentric-seal™ butterfly shutoff valves for a short lay length, and Dual-action™ checks for high performance at low- and high-flow rates. Deringer 30G also features Dual-action checks, but with OS&Y shutoff valves.The Type II bypass is used to monitor unauthorized water usage and is primarily required on fire sprinkler systems.

    Either may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum working pressure: 175psi (12 bar).


    Tekniset tiedot
    • Features

      • Integral shutoffs for shorter lay length and lightweight construction (Deringer 30 only)
      • Tamper-resistant test cocks
      • Type II bypass for lower weight and simplified testing
      • Dual-action check modules for low- and high-flow performance
      • Bow-seal™ full access cover for lower weight and easy access to valve internals
    Tekniset tiedot
    • Yksilöity viitederinger-30-30g-backflow-preventer
    • TuoteperhePlumbing & Flow Control Solutions
    • TuoteryhmäBackflow Prevention
    • TyyppiObjekti (yksittäinen objekti)
    • Julkaisupäivä2020-03-10
    • Painoksen numero1
    Liittyviä
    • Ensisijainen materiaaliBronze
    • Suunniteltu:Yhdysvallat
    • Valmistettu:Yhdysvallat
    Luokitus
    • BIMobject-luokkaPutkityöt - Venttiilit
    • IFC-luokitusVenttiili
    • UNSPSC-nimiValves
    • UNSPSC-koodi401416
    • Uniclass 2015 -koodiPr_65_54_40_13
    • Uniclass 2015 -kuvausCheck valves
    • CSI MasterFormat 2014 -koodi40 05 65
    • CSI MasterFormat 2014 -nimikeValves for Pump Control and Check Service
    • OmniClass-numero23-27 31 19
    • OmniClass-nimikeCheck Valves
    • CSI UniFormat II -koodiC1030
    • CSI UniFormat II -nimikeFittings

    Alueellinen saatavuus

    Pohjois-Amerikka
    Kanada
    Yhdysvallat