ALUTECH Group of Companies

Dock leveller telescopic lip

General information




Dock leveller series:	TL




Permissible dimension (width х height):	1750-2250 х 2000-4500




Conformity to European Union standards:	EN 1398




Purpose of dock leveller:	For compensation of the distance and the height difference between floor of the premises (ramp) and truck body arising during loading and unloading works. Eminently suitable for side unloading and loading of vehicles as for unloading and loading onto railway trains. Dock levellers with telescopic lip are used in isodocks.




Field of application of dock leveller:	Railheads, logistics and distribution centres, shopping complexes, industrial buildings, production facilities, premises

Tekniset tiedot

Specification
Length of the dock leveller:	2000 mm 2500 mm 3000 mm 3500 mm 4000 mm 4500 mm




Width of the dock leveller:	1750 mm 2000 mm 2500 mm




Height of the dock leveller:	600 mm 700 mm 800 mm 900 mm




Load capacity:	60 kN




Steel sheet thickness of the hinged part:	8/10 mm




Steel sheet thickness of the lip:	12/14 mm




Lip length:	500 mm (1000 mm - optional)




Operating temperature range:	-40 … +50




Models of dock leveller:	It is chosen depending on the stage of construction works and characteristics of a particular facility. S - frameless model for mounting in preliminary prepared pit after finishing W - frame model for mounting in preliminary prepared pit after finishing C - frame model for mounting in preliminary prepared pit before laying of the final floor B - model with a frame that allows pouring of the concrete at the stage of ramp construction




Protective coating:	The metal parts of the leveller are treated by bead blasting and coated with 2-component enamel. Coating thickness: 100 microns




Standard colours:	RAL 9017 (black); RAL 7016 (anthracite grey); RAL 5002 (blue).




Construction of dock leveller:	Frame, hinged part, telescopic lip, support beam, reinforcing plates of hinged part, reinforcing ribs of the lip, hydraulic unit, two lifting hydraulic cylinders, hydraulic lip cylinder, control unit




Frame:	Made of steel and is designed for mounting the dock leveller to the pit




Hinged part:	Made of hot-rolled steel sheets




Supporting beam:	Designed for mounting of the main lifting cylinders. Support beam is a roll-formed channel 150×90×60 mm, steel thickness: 5 mm.




Reinforcing plates of the hinged part:	Make the hinged part of the dock leveller more durable and enable to twist at least 3 % (≈ 1.7 degrees) in the cross direction. This allows to level the lateral pitch that occurs when the vehicle tilts to the side. The number of reinforcing plates: 8 PCs. Size of plates: 175×60×3 mm




Telescopic lip with reinforcing ribs:	The lip is placed in the vehicle body. The hot-rolled sheets of steel 12/14 mm thickness with lenticular corrugation are used for manufacturing the lip. Reinforcing ribs of the lip are made of 138x80x80 mm profile. Steel thickness: 6 mm




Hydraulic unit:	Provides hydraulic oil flow to the cylinders, which operate the main part lifting and the lip movement. The tank capacity of the hydraulic unit is 7 l. The length of electric cables used for the hydraulic unit is 7 or 10 m (depending on the length of the dock leveller)




Lifting cylinders:	Two hydraulic lifting cylinders are included in standart kit. Lifting cylinders drive the hinged part of the dock leveller. The plungers of the cylinders have a corrosion resistant coating. The external diameter of cylinders is 60 mm.




Hydraulic lip cylinder:	Provides the lip movement. The plunger of cylinder has a corrosion resistant coating. The external diameter of the lip cylinder is 50 mm




Control unit (CUL 11):	The standard leveller kit includes the control unit. Supply voltage: 3~230/400 V Utility frequency: 50 Hz Electric motor power: <1,5 kW Working power in standby mode: <5 W Nominal source voltage of valve: 24 V direct current Section of wires connected to the socket, mm2: max. 2.5 Enclosure protection: IP54 (professional installation) Operating temperature range, ° C: −25…+40 Power cord length / section of wire: not less than 1 m / 1.5 mm2




Safety systems:	1. Protection from misalignment - two lifting cylinders 2. Automatic locking of hydraulics in case of accidental rollback of the transport while unloading 3. Automatic locking of hydraulics when there is a power failure 4. Protection of the lip from deformation - manufacturing of the lip from a solid steel sheet 5. Protection of feet from becoming trapped - protective shutters 6. Protection of hinged part against breakage - reinforcing plates 7. Protection against sliding of the loader wheels on the dock leveller surface - lentil corrugation of hinged part and lip 8. Supporting beam for the service and repair maintenance

Tekniset tiedot

Yksilöity viitedock-leveller-telescopic-lip
TuoteperheDock levellers
TuoteryhmäDock levellers
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2022-04-13
Painoksen numero1

Linkit

Liittyviä

Ensisijainen materiaaliTeräs
Suunniteltu:Valko-Venäjä
Valmistettu:Valko-Venäjä

Luokitus

BIMobject-luokkaLastauslaitteet - Huoltolavat
IFC-luokitusRamppi
UNSPSC-nimiLift stations
UNSPSC-koodi47101533
Uniclass 2015 -koodiPr_65_80_23
Uniclass 2015 -kuvausDock levellers
CSI MasterFormat 2014 -koodi11 13 19.13
CSI MasterFormat 2014 -nimikeLoading Dock Levelers
OmniClass-numero23-23 23 13 15
OmniClass-nimikeHydraulic Dock Levelers
CSI UniFormat II -koodiE10
CSI UniFormat II -nimikeEQUIPMENT

Alueellinen saatavuus

Eurooppa	Aasia	Pohjois-Amerikka	Afrikka	Etelä-Amerikka	Oseania
Ahvenanmaa	Afganistan	Anguilla	Algeria	Argentiina	Amerikan Samoa
Alankomaat	Arabiemiirikunnat	Antigua ja Barbuda	Angola	Bolivia	Australia
Albania	Armenia	Aruba	Benin	Brasilia	Cooksaaret
Andorra	Azerbaidžan	Bahamasaaret	Botswana	Chile	Fidzi
Belgia	Bahrain	Barbados	Burkina Faso	Ecuador	Guam
Bosnia ja Hertsegovina	Bangladesh	Belize	Burundi	Falklandinsaaret (Malvinassaaret)	Kiribati
Bulgaria	Bhutan	Bermuda	Djibouti	Guyana	Marshallsaaret
Espanja	Brittiläinen Intian valtameren alue	Brittiläiset Neitsytsaaret	Egypti	Kolumbia	Mikronesian liittovaltio
Färsaaret	Brunei	Caribbean Netherlands	Eritrea	Paraguay	Nauru
Gibraltar	Etelä-Korea	Caymansaaret	Etelä-Afrikka	Peru	Niue
Guernsey	Filippiinit	Costa Rica	Etelä-Sudan	Ranskan Guayana	Norfolkinsaari
Huippuvuoret	Georgia	Curaçao	Etiopia	Surinam	Palau
Irlanti	Hong Kong	Dominica	Gabon	Uruguay	Papua-Uusi-Guinea
Islanti	Indonesia	Dominikaaninen tasavalta	Gambia	Venezuela	Pitcairnsaaret
Italia	Intia	El Salvador	Ghana		Pohjois-Mariaanit
Itävalta	Irak	Grenada	Guinea		Ranskan Polynesia
Jersey	Iran	Grönlanti	Guinea-Bissau		Salomonsaaret
Kreikka	Israel	Guadeloupe	Kamerun		Samoa
Kroatia	Japani	Guatemala	Kap Verde		Timor-Leste
Kypros	Jemen	Haiti	Kenia		Tokelau
Latvia	Jordania	Honduras	Keski-Afrikan tasavalta		Tonga
Liechtenstein	Joulusaari	Jamaika	Komorit		Tuvalu
Liettua	Kambodža	Kanada	Kongo		United States Minor Outlying Islands
Luxemburg	Kazakstan	Kuuba	Kongon demokraattinen tasavalta		Uusi-Kaledonia
Malta	Kiina	Martinique	Länsi-Sahara		Uusi-Seelanti
Mansaari	Kirgisia	Meksiko	Lesotho		Vanuatu
Moldova	Kookossaaret	Montserrat	Liberia		Wallis ja Futuna
Monaco	Kuwait	Nicaragua	Libya
Montenegro	Laos	Panama	Madagaskar
Norja	Libanon	Puerto Rico	Malawi
Pohjois-Makedonia	Macao	Saint Kitts ja Nevis	Mali
Portugali	Malediivit	Saint Lucia	Marokko
Puola	Malesia	Saint Vincent ja Grenadiinit	Mauritania
Ranska	Mongolia	Saint-Barthélemy	Mauritius
Romania	Myanmar (Burma)	Saint-Martin	Mayotte
Ruotsi	Nepal	Saint-Pierre ja Miquelon	Mosambik
Saksa	Oman	Sint Maarten	Namibia
San Marino	Pakistan	Trinidad ja Tobago	Niger
Serbia	Palestiinalaisalueet	Turks- ja Caicossaaret	Nigeria
Slovakia	Pohjois-Korea	Yhdysvallat	Norsunluurannikko
Slovenia	Qatar	Yhdysvaltain Neitsytsaaret	Päiväntasaajan Guinea
Suomi	Saudi-Arabia		Reunion
Sveitsi	Singapore		Ruanda
Tanska	Sri Lanka		Saint Helena
Tsekin tasavalta	Syyria		Sambia
Ukraina	Tadžikistan		São Tomé ja Príncipe
Unkari	Taiwan		Senegal
Valko-Venäjä	Thaimaa		Seychellit
Vatikaanivaltio	Turkki		Sierra Leone
Venäjä	Turkmenistan		Somalia
Viro	Uzbekistan		Sudan
Yhdistynyt kuningaskunta	Vietnam		Swasimaa
			Tansania
			Togo
			Tsad
			Tunisia
			Uganda
			Zimbabwe