Julkaise tuotteesi

Rectangular ventilation ducts system

Rectangular ventilation ducts system

3.1(9 reviews)

Rectangular ventilation ducts and fittings are intended for air distribution in ventilation and air-conditioning systems in buildings, including residential buildings, collective residence and public utility buildings. They can also be used in warehouse, industrial and farm buildings.
Straight lines and fittings may be used under the following conditions:
- temperature of transported air in the range from -30 °C to + 70 °C,
- relative humidity of transported air up to 100%,
- air transport without chemically aggressive and abrasive factors,
- air flow speed up to 16 m/s,
- static air pressure difference inside and outside the duct from -500 Pa to 1000 Pa (execution class N, according to WO-KOT / 36/01 revision 2).

Due to the requirements for corrosion resistance, Rectangular ventilation ducts and fittings made of galvanized steel sheet, grade DX51D + Z275 according to PN-EN 10346:2015 standard, are characterized by high durability and can be used in corrosive environments. C1, C2 and C3 atmospheres according to PN-EN ISO 92232012.
The connecting elements should be protected against corrosion in a manner appropriate to the corrosion resistance of the pipes.
Rectangular ventilation ducts and fittings have been classified in class A1, d0 reaction to fire according to PN-EN 13501-1:2019 and as non-flammable, non-drip and non-spreading fire inside buildings according to the decision of the Minister of Infrastructure of 12 April 2002 (Journal of Laws No. 75 of April 12, 2002, item 690, as amended). At the same time, the products are classified as fire resistant.

Tekniset tiedot

Dimensions: 100- 4000 mm
Minimum area of fitting to calculate is 1,0 m 2.

Standard length of ducts-1500 mm.
Basic characteristics:
Duct tightness - class A or B (Assessment method PN-EN 1507:2007 i WO-KOT/36/01 wydanie 2)
Durability (elements made of galvanized steel sheet):
- weight of the zinc coating, g/m2≥ 275
- thickness of the zinc coating, pm 20 (tolerance acc. to PN-EN 10346)
Deformation: No permanent deformation or sudden change of tightness at the limit values of static pressure

Tekniset tiedot

Yksilöity viiterectangular-ventilation-duct-system
TuoteperheVentilation ducts
TuoteryhmäVentilation ducts of galvanized steel Airwent System
TyyppiRakennusmateriaalit
Julkaisupäivä2023-10-26
Painoksen numero1

Linkit

Liittyviä

Ensisijainen materiaaliGalvanoitu teräs
Suunniteltu:Puola
Valmistettu:Puola

Luokitus

BIMobject-luokkaLVI - Kanavistot
IFC-luokitusPutkisegmentti
ETIM-koodiEC000059
ETIM-nimiInstallation duct
Uniclass 2015 -koodiPr_20_85_12
Uniclass 2015 -kuvausBunds and ducts
CSI MasterFormat 2014 -koodi23 31 00
CSI MasterFormat 2014 -nimikeHVAC Ducts and Casings
OmniClass-numero23-33 49 00
OmniClass-nimikeHVAC Ductwork

Alueellinen saatavuus

Eurooppa
Ahvenanmaa
Alankomaat
Albania
Andorra
Belgia
Bosnia ja Hertsegovina
Bulgaria
Espanja
Färsaaret
Gibraltar
Guernsey
Huippuvuoret
Irlanti
Islanti
Italia
Itävalta
Jersey
Kreikka
Kroatia
Kypros
Latvia
Liechtenstein
Liettua
Luxemburg
Malta
Mansaari
Moldova
Monaco
Montenegro
Norja
Pohjois-Makedonia
Portugali
Puola
Ranska
Romania
Ruotsi
Saksa
San Marino
Serbia
Slovakia
Slovenia
Suomi
Sveitsi
Tanska
Tsekin tasavalta
Ukraina
Unkari
Valko-Venäjä
Vatikaanivaltio
Venäjä
Viro
Yhdistynyt kuningaskunta

Samankaltaisia tuotteita

kuva kohteelle Steel Return Grille - 45° Louvered Face - Surface Mount - Model SRH-1

METALAIRE Steel Return Grille - 45° Louvered Face - Surface Mount - Model SRH-1

4.0 (9)

kuva kohteelle Square Cone Face Diffuser - Model 5700

METALAIRE Square Cone Face Diffuser - Model 5700

4.2 (6)

kuva kohteelle ABD-SEA-E Automatic Balancing Damper

Ruskin ABD-SEA-E Automatic Balancing Damper

kuva kohteelle DryerFlex - Dryer Transition Hose

InOvate DryerFlex - Dryer Transition Hose

4.2 (6)

kuva kohteelle Linear Slot Diffuser - Surface Mount 3/4" Border - Model 6600 Series

METALAIRE Linear Slot Diffuser - Surface Mount 3/4" Border - Model 6600 Series

kuva kohteelle Eggcrate Return Grille - Concealed Surface Mount - Extruded Aluminum Sidewall/Ceiling - Model CC5

METALAIRE Eggcrate Return Grille - Concealed Surface Mount - Extruded Aluminum Sidewall/Ceiling - Model CC5