TEROSON FO 150 FOIL-TACK M+S

Properties:

• For indoor use (warm, room-facing side of the wall)
• Diffusion-, air tight
• Thin, light-weight but highly robust
• Very fast and user-friendly installation
• Can be repositioned
• Powerful adhesion even on wet window frames
• Bitumen-free and bitumen-resistant
• Can be used all year round (down to -5 °C)
• Compliant with DIN 18533 for highest requirement

Approvals:

• DIN 18533 for highest requirements
• EMICODE EC 1 PLUS 

Technical descriptions:

• Material base: Double-laminated special sealing strip combined withHenkel hotmelt technology
• Color: Anthracite
• Length (EN 1848-2): 20 / 30 m ± 0,1 %
• Width (EN 1848-2): 150-1000 mm ± 0,05 %
• Thickness (EN 1849-2): total - ca. 0,4 mm ± 10 % effect. 100µm ± 5 %
• Area weight (EN 1849-2): ca. 0,4 kg/m² ± 0,03
• Straightness (EN 1842-2): passed
• Visible defects (EN 1842-2): passed
• Application temperature: -5 °C bis +35 °C
• Cold flexibility:(EN 495-5) > -30 °C
• Tensile strength / Extension N/6mm): (EN 12311-2, method B) ≥ 25 N ≥ 30 %
• Tear propagation resistance: (EN 12310-1) > 100 N (Nail shank)
• Resistance to static load (EN 12730): ≤ 5 kg (test method B)
• Resistance to impact: (EN 12691): ≤ 150 mm (test method A), ≤ 500 mm (test method B)
• Shear resistance of the seams: (EN 12371-2) > 125 N/50 mm
• Durability with artificial aging: (EN 1296 & EN 1928) passed
• Resistance to chemicals: (DIN EN 847 & EN 1928) passed
• Water vapor permeability: (EN 1931 (m²sPa/kg)) 4,0 ± 30% / sd-value = 102 m
• Watertightness (EN 1928): 60 kPA (passed) /4 bar / 72 h ≙ 40 mW
• Bitumen compatibility: (EN 1548 & EN 1928) passed
• Fire resistance:(EN 13501-1) classe E
• UV resistance: 12 months
• Roll dimensions: 30 m long, 80-350 mm wide; 20 m long, 400-700 mm wide

Installation instructions:

TEROSON FO 150 FOIL-TACK M+S is equipped with an asymmetrically divided release film. After peeling off the 30 mm wide film, this part of the sealing strip can be fixed cleanly and efficiently to the profile/frame.
In the 2nd step, evenly pull the release film off the selfadhesive hotmelt coating. Press the strip firmly down to the substrate using the TEROSON hard rubber roller.