Flanged Elbow

Traducido por Google,

Nordfab fabrica conductos para su uso en sistemas de recolección de polvo, niebla y humos.

Nuestros codos con bridas (curvas) permiten cambiar la dirección del flujo de aire en una línea de conductos de recolección de polvo. Las bridas en ángulo se fijan de manera suelta y se sujetan mediante un borde Vanstone.

Todos los codos Nordfab® están disponibles en curvas de 90°, 60°, 45° y 30°.

Codos de radio largo disponibles
Construcción en acero galvanizado o 304SS
Disponible con bridas con patrón de orificios personalizado
Otros calibres de material incluyen 18, 16, 14, 12 y 10.
Juntas de brida disponibles

Comuníquese con Nordfab o con su distribuidor local de Nordfab para obtener ayuda con tamaños más grandes y opciones de materiales/calibres.

Especificaciones

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.