Flanged Pipe 18ga

Traducido por Google,

La tubería para conductos con bridas de calibre 18 de Nordfab proporciona durabilidad adicional para aplicaciones de alto desgaste.

La brida en ángulo rotacional se retiene mediante un labio Van Stone en el extremo de la tubería. Brida totalmente soldada bajo pedido.

Úselo con nuestro adaptador de brida en ángulo para conexiones rápidas a tuberías y accesorios QF.

Juntas de brida angular disponibles.

• Disponible en galvanizado y acero inoxidable 304 (como se muestra a continuación) o acero inoxidable 316 o acero al carbono opcional
• Disponible con extremos QF en diámetros de hasta 24" y otros tipos de extremos diversos
• Calibres opcionales 22, 20, 16, 14, 12 y 10

Póngase en contacto con Nordfab o con su distribuidor local de Nordfab para obtener ayuda con tamaños más grandes y opciones de material/calibre.

Especificaciones

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.