Maestro Sensor Switch with Occupancy/ Vacancy Sensor

Lutron Electronics

Maestro Sensor Switch with Occupancy/ Vacancy Sensor

Traducido por Google,

El interruptor del sensor de ocupación Lutron Maestro combina un

Interruptor Maestro con ocupación o desocupación por infrarrojos pasivos

sensor. El sensor detecta el calor de los ocupantes en movimiento.

dentro de un área para determinar si el espacio está ocupado.

Según la retroalimentación del sensor, el sensor de ocupación

El interruptor ajustará la carga en consecuencia.

Características
• Sensores infrarrojos pasivos con tecnología exclusiva Lutron XCT
para detección de movimiento fino
• Campo de visión del sensor de 180°
• Movimiento principal de hasta 30 pies x 30 pies (9 mx 9 m) [900 pies2 (81 m2)]
cobertura y 20 pies x 20 pies (6 mx 6 m) [400 pies2 (36 m2)] menores
cobertura de movimiento
• La versión de ocupación se puede configurar en Auto-ON/Auto-OFF o
Encendido manual/apagado automático
• Versión vacante disponible para cumplir con los requisitos del Título 24 de CA
• Tiempo de espera ajustable (1, 5, 15 o 30 minutos) y alto/bajo
ajuste de sensibilidad
• Tipos de carga: incandescente, halógena, ELV, MLV, CFL, LED,
fluorescente magnético, fluorescente electrónico y ventilador.

Especificaciones

Specifications
Regulatory Approvals
• UL® Listed to U.S. and Canadian safety
requirements.
• NOM Certification (MS- models only).
Power
• 120 V~ 50/60 Hz*
• 120–277 V~ 50/60 Hz*
Key Design Features
• All lighting loads
• Crush/tamper resistant lens
• Smart ambient light detection
• Adaptive switching algorithm for extended relay life
• XCT Technology for fine motion detection
• Lutron patented Softswitch
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%–90% humidity, non-condensing.
Indoor use only.
Warranty
• 5-Year Limited Warranty. For additional Warranty
information, please visit
www.lutron.com/TechnicalDocumentLibrary/Sensor_
Warranty.pdf
Additional Information
• When using MS-OPS2, MS-OPS5M,
MS-OPS6M2-DV, MS-VPS2, MS-VPS5M, or
MS-VPS6M2-DV on GFI-controlled circuits, please
see Lutron P/N 048440 on www.lutron.com
• For Maestro Occupancy sensing dimmer models,
please see Lutron P/N 369270 on www.lutron.com
• For use with MA-AS, MSC-AS, MA-AS-277, or
MSC-AS-277 to control the load from more than two
locations, please see Lutron P/N 048435 on
www.lutron.com
• For more information, please see
www.lutron.com/occvacsensors
• Lutron Customer Assistance: 1.844.LUTRON1

Advanced Features
Switching
• Standard zero cross—maximizes relay life by
switching at the point of minimum energy on the AC
power curve
• Adaptive zero cross—maximizes relay life by
switching at the point of minimum energy on the
AC power curve. Actively adapts to variations in
relay timing
• Lutron Patented Softswitch circuit—eliminates arcing
at mechanical contacts when loads are switched.
Extends relay life to an average of 1,000,000 cycles
(on/off) for resistive, capacitive, or inductive sources
XCT Technology
Advanced sensing technology for fine motion
detection ensures that the lights stay on while the
room is occupied, and that the sensor does not turn
on falsely when there is no occupancy in the room.
For more information, see
www.lutron.com/TechnicalDocumentLibrary/
white%20paper%20XCT%204-23-09%20B.pdf