IVAR

VARIMIX

Traducido por Google,

VARIMIX permite disponer la sala de máquinas según un nuevo concepto de espacio y funcionalidad. Esta solución brinda la oportunidad de gestionar múltiples áreas térmicas con diferentes características como zonas verdaderamente independientes en un espacio ordenado y racional, gracias a su estructura modular y flexibilidad de instalación excepcional. En los kits de baja temperatura, la válvula mezcladora está disponible con diferentes características hidráulicas y en versiones de 3 o 4 vías. Al producir una mezcla incluso en la línea de retorno, es especialmente adecuado para calderas más antiguas en las que la temperatura de retorno no debe ser demasiado baja para evitar la corrosión. Finalmente, los módulos “LT” están específicamente diseñados para aplicaciones con fuentes de calor de baja temperatura (por ejemplo, bombas de calor).

Principales características:

• fácil de instalar;
• compacto y ordenado;
• completamente reversible;
• versátil y flexible;
• adecuado para aplicaciones de calefacción y refrigeración.

Caudal primario máx.: 4500 l/h
Caudal máximo para cada kit: 3000 l/h

Especificaciones

Distribution and mixing system IVAR VARIMIX for thermal power stations, modular with:
- VAR 00 (cod. 550600): hydraulic separator for VARIMIX system. CB753S brass body. Automatic air vent valve, size 1/2".  Shut-off ball valve with soft-seal fitting, size 1/2". Ball valve with red knob for interception of automatic vent valve with soft seal fitting. Possibility of straight or angular primary outlet. Thermomanometer 0÷120°C; 0÷6 bar on primary outlet. Thermometer 0÷120°C on primary outlet. Peroxide-cured EPDM O-rings. Support made of FeP13 with fixing screws kit. Insulation shell made of expanded polyethylene. Connections: 1"1/4M.
- AC 655 NST (cod. 506407): pair of male-female straight shut-off ball valves with soft-seal union.
- VAR 30 (cod. 550630): modular distribution manifold for VARIMIX system made of CB753S brass. Power supply to distribution circuits upwards or downwards. Complete with shut-off ball valves on the connections to the branches. Support hangers made of FeP13. Insulation shell made of expanded polyethylene. Peroxide-cured EPDM O-rings. Connections to distribution circuits by with soft-seal unions, size G 1"1/4 F, delivery/return centre distance 100 mm. Primary connections size G 1"1/4F, delivery/return centre distance 100 mm. Max operating temperature 0÷120°C; max operating pressure 10 bar; max flow rate 4500 l/h.
- VAR 10 (cod. 550610 - 550610P - 550610PE) – VAR 11: high-temperature direct flow kit for storage heat exchangers. Complete with ball valve and manual air vent valve on heating flow; delivery/return thermometer 0÷120°C; not return valve; fill/drain valve; black insulation shell made of polystyrene. Moulded parts made of CW617N brass; Peroxide-cured EPDM O-rings. Connections to distribution circuits by revolving soft-seal fitting, size G 1"1/4 F, delivery/return centre distance 100 mm. Cod. P with 3-speed standard pump WILO3F centre distance 180 mm. Cod. PE with variable-speed electronic pump WILO4F centre distance 180 mm. Max operating temperature 0÷120°C; max operating pressure 10 bar. Differential pressure by-pass (cod. 550611 - 5550611P).
- VAR 20-21-22-23 Low-temperature mixing kit equipped with 3 way mixing valve Kv 4 (cod. 550620NB - 550620PE) or Kv 8 (cod. 550623NB - 550623PE) with connector on secondary balancing selector made of brass CB753S; ball valve and manual air vent valve on heating flow; delivery/return thermometer 0÷120°C; not return valve; fill/drain valve; black insulation shell in polystyrene. Moulded parts made of CW617N brass; Peroxide-cured EPDM O-rings; stainless steel springs and circlips; Connections to distribution circuits by revolving soft-seal fitting, size G 1"1/4 F, delivery/return centre distance 100 mm. Cod. P with 3-speed standard pump WILO3F centre distance 180 mm. Cod. PE with variable-speed electronic pump WILO4F centre distance 180 mm. Max operating temperature 120°C; max operating pressure 10 bar.
Low-temperature mixing kit equipped with 4 way mixing valve Kv 4 (cod. 550621NB - 550621PE) or Kv 2 (cod. 550622NB - 550622PE)  with connector on secondary balancing selector made of brass CB753S; ball valve and manual air vent valve on heating flow; delivery/return thermometer 0÷120°C; not return valve; fill/drain valve; black insulation shell in polystyrene. Moulded parts made of CW617N brass; Peroxide-cured EPDM O-rings; stainless steel springs and circlips; Connections to distribution circuits by revolving soft-seal fitting, size G 1"1/4 F, delivery/return centre distance 100 mm. Cod. P with 3-speed standard pump WILO3F centre distance 180 mm. Cod. PE with variable-speed electronic pump WILO4F centre distance 180 mm. Max operating temperature 120°C; max operating pressure 10 bar.
Low-temperature mixing kit equipped with 3 way mixing valve Kv 4 (cod. 550620NBLT - 550620PELT) or Kv 8 (cod. 550623NBLT - 550623PELT) made of CB753S brass; ball valve and manual air vent valve on heating flow; delivery/return thermometer 0÷120°C; not return valve; fill/drain valve; black insulation shell in polystyrene. Moulded parts made of CW617N brass; Peroxide-cured EPDM O-rings; stainless steel springs and circlips; Connections to distribution circuits by revolving soft-seal fitting, size G 1"1/4 F, delivery/return centre distance 100 mm. Cod. P with 3-speed standard pump WILO3F centre distance 180 mm. Cod. PE with variable-speed electronic pump WILO4F centre distance 180 mm. Max operating temperature 120°C; max operating pressure 10 bar.
Low-temperature mixing kit equipped with 4 way mixing valve, Kv 4 (cod. 550621NBLT - 550621PELT) or Kv 2 (cod. 550622NBLT - 550622PELT)  with CB753S brass body; ball valve and manual air vent valve on heating flow; delivery/return thermometer 0÷120°C; not return valve; fill/drain valve; black insulation shell in polystyrene. Moulded parts made of CW617N brass; Peroxide-cured EPDM O rings; stainless steel springs and circlips; Connections to distribution circuits by revolving soft-seal fitting, size G 1"1/4 F, delivery/return centre distance 100 mm. Cod. P with 3-speed standard pump WILO3F centre distance 180 mm. Cod. PE with variable-speed electronic pump WILO4F centre distance 180 mm. Max operating temperature (pump excluded) 120°C; max operating pressure 10 bar.
- M106: motor for mixing valves. 3-point setting 230 V AC (cod. 501394). Proportional control 0-10 V 24 V AC (cod. 501395). 3-point setting 24 V AC (cod. 501396).
- CTC 20 (cod. 501648): revolving actuator with incorporated regulator and probes for fixed point control of mixing valves 230 V AC.
- CC 25 (cod. 501647): revolving actuator with incorporated regulator and probes for climatic control of mixing valves 230 V AC.
- AVAR 01 (cod. 180006): expansion tank for VARIMIX system (18 l).
- AVZS 00 – AVZS 01: motor for two zone ball zone valves 230V AC – 50 s (cod. 506241). Motor for two zone ball zone valves 230V AC – 25 s (cod. 506241V).
- AVZS 10 – AVZS 11: motor for two zone ball zone valves with release device - 230V AC – 50 s (cod. 506242). Motor for two zone ball zone valves with release device 230V AC – 50 s (cod. 506243). Motor for two zone ball zone valves with release device 230V AC – 25 s (cod. 506242V). Motor for two zone ball zone valves with release device 230V AC – 25 s (cod. 506243V).

Especificaciones técnicas

ReferenciaVARIMIX
Familia de productoThermal Power Station
Grupo de productosVarimix
TipoObjeto (objeto simple)
Día de publicación2019-09-02
Número de edición2

Links

Instalación URLhttps://www.ivar-group.com/en/web/international/modular-system-for-thermal-power-stations-varimix/c-2496-2486
Instrucciones de instalaciónhttps://www.ivar-group.com/en/web/international/modular-system-for-thermal-power-stations-varimix/c-2496-2486
Certificación de productohttps://www.ivar-group.com/en/web/international/modular-system-for-thermal-power-stations-varimix/c-2496-2486
Descripción técnicahttps://www.ivar-group.com/en/web/international/modular-system-for-thermal-power-stations-varimix/c-2496-2486

Información relacionada

Material principalBronce
Diseñado enItalia
Fabricado enItalia

Clasificación

Categoría BIMobjectFontanería - Fontanería - Otros
Clasificación IFC Válvula
Nombre UNSPSCValves
Código UNSPSC401416
Código Uniclass 2015Ss_60
Descripción Uniclass 2015Heating, cooling and refrigeration systems
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TítuloHeating, Ventilating, and Air Conditioning (HVAC)
Número OmniClass23-33 00 00
Título OmniClass HVAC Specific Products and Equipment
CSI UniFormat II CódigoD30
CSI UniFormat II TítuloHVAC

Disponibilidad en regiones

Europa	Asia	Norteamérica	África	Sudamerica	Oceanía
Åland	Afganistán	Anguilla	Angola	Argentina	Australia
Albania	Arabia Saudí	Antigua y Barbuda	Argelia	Bolivia	Estados Federados de Micronesia
Alemania	Armenia	Aruba	Benín	Brasil	Fiyi
Andorra	Azerbaiyán	Bahamas	Botsuana	Chile	Guam
Austria	Bangladesh	Barbados	Burkina Faso	Colombia	Isla Norfolk
Bélgica	Baréin	Belice	Burundi	Ecuador	Islas Cook
Bielorrusia	Brunéi	Bermudas	Cabo Verde	Guayana Francesa	Islas Marianas del Norte
Bosnia-Herzegovina	Bután	Canadá	Camerún	Guyana	Islas Marshall
Bulgaria	Camboya	Caribe Neerlandés	Chad	Islas Malvinas (Falkland Islands)	Islas Pitcairn
Chipre	Catar	Costa Rica	Comoras	Paraguay	Islas Salomón
Ciudad del Vaticano	China	Cuba	Congo	Perú	Islas Ultramarinas Menores de Estados Unidos
Croacia	Corea del Norte	Curazao	Costa de Marfil	Surinam	Kiribati
Dinamarca	Corea del Sur	Dominica	Djibuti	Uruguay	Nauru
Eslovaquia	Emiratos Árabes Unidos	El Salvador	Egipto	Venezuela	Niue
Eslovenia	Filipinas	Estados Unidos	Eritrea		Nueva Caledonia
España	Georgia	Granada	Esuatini		Nueva Zelanda
Estonia	Hong Kong	Groenlandia	Etiopía		Palaos
Finlandia	India	Guadalupe	Gabón		Papúa Nueva Guinea
Francia	Indonesia	Guatemala	Gambia		Polinesia Francesa
Gibraltar	Irak	Haití	Ghana		Samoa
Grecia	Irán	Honduras	Guinea		Samoa Americana
Guernsey	Isla de Navidad	Islas Caimán	Guinea Ecuatorial		Timor Oriental
Hungría	Islas Cocos (Keeling)	Islas Turcas y Caicos	Guinea-Bissau		Tokelau
Irlanda	Israel	Islas Vírgenes Británicas	Kenia		Tonga
Isla de Man	Japón	Islas Vírgenes de los Estados Unidos	Lesoto		Tuvalu
Islandia	Jordania	Jamaica	Liberia		Vanuatu
Islas Faroe	Kazajistán	Martinica	Libia		Wallis eta Futuna
Italia	Kirguistán	México	Madagascar
Jersey	Kuwait	Montserrat	Malaui
Letonia	Laos	Nicaragua	Malí
Liechtenstein	Líbano	Panamá	Marruecos
Lituania	Macao	Puerto Rico	Mauricio
Luxemburgo	Malasia	República Dominicana	Mauritania
Macedonia del Norte	Maldivas	Saint Barthélemy	Mayotte
Malta	Mongolia	San Cristóbal y Nieves	Mozambique
Moldavia	Myanmar (Birmania)	San Martín	Namibia
Mónaco	Nepal	San Pedro y Miquelón	Níger
Montenegro	Omán	San Vicente y las Granadinas	Nigeria
Noruega	Pakistán	Santa Lucía	República Centroafricana
Países Bajos	Palestina	Sint Maarten	República Democrática del Congo
Polonia	Singapur	Trinidad y Tobago	Reunión
Portugal	Siria		Ruanda
Reino Unido	Sri Lanka		Sahara Occidental
República Checa	Tailandia		Santa Elena
Rumanía	Taiwán		Santo Tomé y Príncipe
Rusia	Tayikistán		Senegal
San Marino	Territorio Británico del Océano Índico		Seychelles
Serbia	Turkmenistán		Sierra Leona
Suecia	Turquía		Somalia
Suiza	Uzbekistán		Sudáfrica
Svalbard y Jan Mayen	Vietnam		Sudán
Ucrania	Yemen		Sudán del Sur
			Tanzania
			Togo
			Túnez
			Uganda
			Zambia
			Zimbabue