Publique sus productos
PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System
PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System
PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System
PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System
PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System
    GCP

    PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System

    Traducido por Google,

    PREPRUFE® Plus

    Las membranas impermeables PREPRUFE® Plus son láminas compuestas que comprenden un respaldo robusto de HDPE virgen, un adhesivo sensible a la presión y un revestimiento transitable resistente a la intemperie con doble adhesivo PREPRUFE® ZipLap™ para mayor seguridad y practicidad en la superposición. Con su Advanced Bond Technology™, las membranas desarrollan una unión adhesiva continua con el concreto vertido sobre o contra él, evitando la migración de agua entre la estructura y la membrana, mejorando significativamente la protección contra fugas.

    BITUTHENE® 8000/8000S

    BITUTHENE® 8000/8000S combina la tecnología adhesiva comprobada de BITUTHENE® con una película portadora única de color gris para proporcionar un rendimiento superior y una instalación más sencilla.

    Especificaciones
    • PREPRUFE® Plus

      Integrally bonded HDPE sheet waterproofing with dual adhesive laps for pre-applied waterproofing applications for installation below slab. Basis of design is PREPRUFE® 300R Plus by GCP Applied Technologies. 

      Membrane shall be 1.2mm thick, uniform, flexible sheets consisting of 0.8mm thick, HDPE sheet coated with a pressure-sensitive adhesive, a trafficable weather resistant coating.  
      The membrane shall have a kick-out roll function to facilitate ease of application and shall have no release liner to reduce the environmental impact. Continuity between adjacent sheets shall be assured with dual adhesive laps. The membrane shall form an integral and permanent bond to placed concrete to prevent water migration at the interface of the membrane and structural concrete.  
      The membrane shall be chemically resistant and protect the structure from salt and sulphate attack.  It shall have been proven to be tested to a resist a minimum lateral water migration of 70m head of water (686kpa), at the membrane concrete interface and have a zero permeance to moisture, it will not activate prematurely due to wet conditions and is unaffected by ground settlement beneath slabs.

      BITUTHENE® 8000/8000S 

      Integrally bonded Bituminous/ HDPE sheet waterproofing with self adhesive laps for post applied waterproofing applications. Basis of design is GCP BITUTHENE® 8000 by GCP Applied Technologies. 

      The membrane shall be formed of a, flexible, multi-layered composite sheet membrane comprising a thick grey HDPE film with an highly aggressive bituminous adhesive.  The membrane is specially formulated to allow application to “green concrete” and able to be applied in damp or marginal weather conditions with the use of a moisture tolerant primer system. Typically employed vertically, for below slab or with soil retention systems refer to either PREPRUFE® 160R / PREPRUFE® 300R (J40/297) or consult GCP Applied Technologies for further guidance. 

      The membrane shall be chemically resistant  It shall have been proven to be tested to a resist a minimum lateral water migration of 70m head of water (686kpa), at the membrane concrete interface and have a zero permeance to moisture, it will not activate prematurely due to wet conditions

    Especificaciones técnicas
    • ReferenciaPreprufe-Plus_Bituthene-8000-8000S_Waterproofing_System
    • Familia de productoWaterproofing
    • Grupo de productosBelow Ground Applications
    • TipoMateriales de construcción
    • Día de publicación2019-03-28
    • Número de edición1
    Información relacionada
    • Material principalPolietileno
    • Material secundarioBitumen
    • Diseñado enEstados Unidos
    Clasificación
    • Categoría BIMobjectMateriales de construcción - Impermeabilización
    • Código Uniclass 2015Pr_25_57_65_60
    • Descripción Uniclass 2015Plastics sheets

    Disponibilidad en regiones

    Europa
    Albania
    Andorra
    Austria
    Bélgica
    Bielorrusia
    Bosnia-Herzegovina
    Bulgaria
    Chipre
    Ciudad del Vaticano
    Croacia
    Dinamarca
    Eslovaquia
    Eslovenia
    España
    Estonia
    Finlandia
    Francia
    Grecia
    Hungría
    Irlanda
    Islandia
    Italia
    Letonia
    Liechtenstein
    Lituania
    Luxemburgo
    Macedonia del Norte
    Malta
    Moldavia
    Mónaco
    Montenegro
    Noruega
    Países Bajos
    Polonia
    Portugal
    Reino Unido
    República Checa
    Rumanía
    Rusia
    San Marino
    Serbia
    Suecia
    Suiza
    Ucrania