5539X _ Hydraulic separator/ steel manifold with insulation

Hydraulics separators/manifolds are mainly used in heating and cooling systems and allow for different thermal regulations in the various environments.

They are used for the most part in central heating stations of small dimensions where at least one primary pump is present (generator) and one or two additional secondary pumping groups (utilities), with a double function:
- The lower part has the function of hydraulic separator between the main circuit and the secondary one, compensating possible flow rate and low loss differences.
-The upper part has the function of distribution manifold supplying the utilities and gathering the return fluid.

The hydraulic separator/manifold work with a maximum flow rate from 3 to 7 mc/ h

Hydraulic separator/steel manifold with axial distance of 125mm, male threaded connections
Available with insulation and wall fixing brackets.

Wide range available, for any installation requirement from 2÷4 ways
Separator connections G1" 1/2 (DN40) or G2" (DN50)
Manifold connections G1" 1/2 (DN40)

Section [mm] | ways | Max flow rate [mc/h]
80x80mm | 2-3 | 3
120x120mm | 2-3-4 | 7

Production range:
Art.5538X Insulated steel manifold
Art.5540X Insulated steel manifold

Related products:
Art. 2361-2371-2371B-2372N Standard bore ball valves for water with Male/Female thread
Art. 2311-2311N-2321-2321N Full bore ball valve Male/Female with aluminium handle

Art. 0600 Pe-X pipe with Aluminium coil
Art. 1652 Press fitting/ Female for multi-layer pipe
Art. 1655 Elbow female press fitting for multi-layer pipe
Art. 1659 "T" press female fitting for multi-layer pipe

Art. 5535G Pumping group

Art. 1557SET Generic fitting kit female attachment