Heavy Duty Commercial Electric Water Heater

Heavy Duty Electric commercial water heaters are available in 50 through 175 gallon capacities. All models ‘quick ship’ from Rheem warehouses – no deposit required

Features & Benefits

50, 85, 120 and new 175 gallon model can be shipped to your location in just a few days, no deposit required and Rheem pays shipping charges
Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster
Inputs: 3 through 108 kW
Voltages: 208, 240, or 480 VAC in either single phase or 3-phase; 277 VAC single phase
Element wattages: 2000, 3000, 4000, 4500, 5000 and 6000 in the four voltages; 9000 watt element at 480 VAC
Choose 1, 3, 6, 9 or 12 element models for your specific application
Elements are Lifeguard™ stainless steel, screw-in type that resist burn out and corrosion
Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design
ASME construction is available on 50, 85 and 120 gallon models and comes standard on 175 gallon
Two anode rods are installed to ensure long life and corrosion resistance

Efficiency

98% thermal efficiency
Thick foam insulation for minimal standby heat loss

Performance

Recovery rate: Up to 438 gallons GPH at a 100 degree rise
190° F maximum delivered temperature

Capacity & Shipping Weight

50 Gal/270 lbs./320 lbs. ASME
85 Gal/350 lbs./380 lbs. ASME
120 Gal/430 lbs./460 lbs. ASME
175 Gal/700 lbs. ASME only

Easy Installation & Service

Control box is located at the front of unit for easy wiring during installation – Multiple knockout holes accommodate a variety of conduit sizes
Exclusive! System Sentinal™ provides a diagnostic panel with LEDs that correspond to the number, location and status of each element
Exclusive! Full-port, full-flow, brass drain valve for faster draining
Minimum distance to combustible is zero inches from jacket and 18 inches from access door
All models approved for installation on combustible flooring

Plus

Temperature and pressure relief valve at top of 175 gallon model and side on all other models
Water connections: hot and cold water inlets are 2-1/2" NPT dielectric nipples on the 175 gallon model and 1-1/2" on all other models