Rheem® Commercial Tankless System
This custom-built tankless solution arrives on the jobsite factory-assembled with single point connections, including:
- RTGH-CM95 Condensing Tankless Water Heaters
- Factory installed system control manifold
- Pre-sized water and gas manifold
- Electrical wiring
- Condensate lines
Configurations
- Wall mounted system
- Wall hung system
- Free-standing system
System Options
- 2-6 tankless units per system
- Indoor & Outdoor systems
- Common venting options for up to 10 units
- Easy manifolding of up to 20 units
Engineered Solution by Rheem
- Scalable from 11,000 BTU/h to 1,199,400 BTU/h per system (6 units max per system rack, multiple racks can be linked up to 20 total units or 3,998,000 BTU/h)
- Multiple configurations
- Options for future expansion
Installation Savings
- Reduce installation costs with single point connections Industry Best Solutions
- Minimum side to side clearances = 1/2 inch (to combustibles)
- Minimum fow rate = 0.26 GPM
- Minimum activation rate = 0.40 GPM
- UL-1738 & ULC-S636 certification on PPs venting accessories Redundancy
Efficiency
- Up to 96% Thermal Efficiency with stainless steel condensing heat exchanger
- Intelligent electronic controls designed to increase energy efficiency and safety
Performance
- Low flow fixture compatible – Industry minimum flow rate of .26 GPM and minimum activation flow rate of .40 GPM ensures the user will receive hot water even in low demand situations
- Recirculation Pump Kit-Ready – Quickly pairs with our Recirculation Pump kit to provide instantaneous hot water at the tap2
Easy Installation and Service
- Ability to vent with room air
- Indoor, Natural Gas units are common vent compatible up to 10 units
- Common venting with Polypropelene
- Built-in condensate neutralizer
- 1/2" Gas line compatibility on every model
- Exclusive! Maintenance Notice Setting Alerts – flashing a warning code to call for service check
- Self-diagnostic system for easy installation and service
- Digital display shows temperature setting and maintenance codes
- Two-pipe direct vent system designed for PVC pipe (up to 38 ft. of 3" PVC pipe or 5 ft. of 2" PVC pipe)
- High altitude capability up to 8,400 ft
- Commercial Project Sizing Available from Rheem Applications Engineers
- Digital remote control and 10 ft. of thermostat wire included
- Freeze protection to -30°F
Technology
- Manifold control models - with factory installed translator links up to 20 units
- Hot-start programming - helps minimize fluctuation in water temperature, referred to as “cold water sandwich”, during periods of frequent on/off operation
- Exclusive! Overheat film wrap with industry-best side to side clearance of 1/2 inch
Parts & Accessories
- EZ Rack Kit
- Common Venting: Direct Vent & Room Air header kits
- AllClear® Water Treatment System