SLR-12-0 Standing Seam Roof Panel System

With a wide selection of design options and superior strength capabilities, the SLR Series provides versatile architectural solutions for any project. SLR panels are standing seam roofing panels that can transition to wall. The 2" high seam may be mechanically seamed at 90 or 180 degrees at slopes as low as 1/2: 12 for the latter. Onsite roll-forming is available. Contact Morin for custom design options and capabilities for SLR.

Product Highlights

Onsite roll-forming of panels in continuous lengths is available to eliminate panel end laps
Watertight seam from eave to ridge for slopes as low as 1/2: 12 (for 180 degree seam)
Design option to transition from wall to roof
Curving capability down to 20' radius
Clip relief design to allow thermal expansion and contraction
Available in aluminum, galvalume, stainless steel, zinc, and copper
Standard and custom finish options available
ASTM, UL and FM approvals

Specification

Panel Attachment
Standing seam concealed sliding or fixed clip, mechanically seamed
Panel Dimensions
Width: 12" nominal
Height: 2" nominal
Standard Lengths: 5'-40' (shorter and longer lengths available)

Color and Finish Options
Full range of Morin standard colors as well as custom color options are available. Finish on one side or both sides.
Environmental
LEED Certified and EPD available for all products. View the EPD and LEED letter on our Certifications page.

Technical specification

Unique ref.slr-12-0-roof-panel-system
Product familyRoof Systems
Product groupSLR Series
TypeObject (single object)
Date of publishing2023-09-07
Edition number1

Links

Product urlhttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-12-0/
Installation instructionshttps://www.morincorp.com/content/dam/morin/products/slr/slr-installation-guide.pdf
Product certificationhttps://www.morincorp.com/us/en/products/roof-systems/slr-standing-seam/slr-12-0/?s=d
Technical descriptionhttps://www.morincorp.com/content/dam/morin/products/slr/morin-slr-slr-12-0-cr-r100-productdatasheet.pdf

Material mainMetal
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryConstruction - Roof
IFC classificationRoof
ETIM CodeEG019610
ETIM NameRoofing materials
Uniclass 2015 CodePr_25_71_14
Uniclass 2015 DescriptionCladding and lining panels (Lightweight cladding and roofing panels)
CSI MasterFormat 2014 Code07 41 13
CSI MasterFormat 2014 TitleMetal Roof Panels
OmniClass Number23-13 39 11 11
OmniClass TitleExterior Metal Roof Panels