Neva 4 - Outside Lighting

Linear profile for outdoor applications
walkover
surface mounted (ceiling, wall, floor) with brackets or recessed (ceiling, floor, wall) with outer casing
Power consumption: 16W
Power supply: 230Vac
Lumen output at source: 1542 lm (3000K)
Delivered lumen output: 966 lm (3000K, 30°)
6 power LEDs pitch 120 mm, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 11°, 30°, 45°: optical system composed of a series of light sources equally spaced at 120 mm from each other. The deep-set TIR lens guarantees high-quality light emission and visual comfort, 10°x40°: optical system composed of a series of light sources equally spaced at 120 mm from each other. The deep-set elliptical TIR lens guarantees high-quality light emission and visual comfort
CRI Colour Rendering Index: 80
Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy EN AW 6060 T5, made from an extruded profile, then anodized black to give the product better heat dissipation and increase its resistance to corrosion. Caps made of glass-fibre-reinforced polyamide for greater resistance
Screen material: 4-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches.
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
Installation: product complete with IP68 connector and built-in IPS system. Compatible with cables with minimum cross-section 2x1 and cable Ø min. 7 mm max. 12 mm. Simplified connection for quick, effective installation. In/out connection possible with connector accessory.
built-in power supply unit
Control system: ON/OFF, 0-10V
Ingress protection: IP65, IP67
Impact resistance: IK08
Easy to wire. The electrical cables can be attached directly to the connector, making the product easier to install
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class II
Weight: 1700 g
Dimensions: 677x37x74 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: honeycomb louvre, WB6520 Anti-glare shield in black-painted stainless steel - 673 mm, WC6520 Aluminium outer casing - 682 mm, WC6720 Aluminium outer casing for plasterboard - 682 mm, WFA00 2-pin female connector, WFA01 4-pin female connector, WMA01N Pair of brackets h 75 mm, WMA02N Pair of brackets h 140 mm, WN6001 Anti-fall kit, WN6002 U-shaped brackets pair, WN6003 Springs pair, WN6004 Pair of extractors for outer casings, WN6005 Alignment kit for outer casing
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption