iN199 Neuron Slim Design Commercial Tankless System

The NEW iN199 Neuron

The latest addition to the Neuron line was specifically designed to be drop-in ready for all tankless water heaters using Natural Gas or Propane that utilize a 120-gallon tank. Intellihot's iN199 will save commercial properties up to 40% per year on their energy bills and reduce greenhouse gas emissions by 40%. The iN199 is the perfect tankless solution for commercial properties that want reliable hot water at an affordable price with no tank to maintain.

System installation is faster, easier, and less expensive than traditional tank-type water heaters.

iN199 Features:

199,950 BTU/hr.
Flexible-Floating Design, stress-relieving and thermal shock resistant
Multi-Unit - Masterless cascading with common venting
Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
7" Color Touch Screen - access to real-time critical data, troubleshooting, parts wear and more
Direct Cell-LTE Connectivity (Monitored 24/7 for FREE for 2 Years)
Designed and Built in the U.S.
Quick ship from our factory to your warehouse or job site!
Weight: 266lbs.

Additional Features

Gas Pressure Sensor – Address site gas installation issues

Water Pressure Sensor – Eliminate pump startup failures

Pump controlled by Control Board – Automatic pump control

Control Board OTA – With software backup

Intelligent Series touchscreen Display – Increased memory for screens

Smart Faults/Alerts – The software will identify the most likely cause

Specification

Type: Indoor, Floor Mounted, On-Demand Water Heater
Fuel: Preset for NG / LP convertible without additional parts
Minimum Input (BTU/hr): 30,000
Maximum Input (BTU/hr): 199,950
Maximum Output (BTU/hr): 191,950
Thermal Efficiency: 96%
Turn Down Ratio (TDR): 7:1
Water Inlet / Outlet Connections: 1-1/2” NPT
Gas Inlet Connection: 3/4” NPT
Condensate Drain Connection: 3/4” NPT panel mount
Maximum Condensate Flow Rate (GPH): 3.6
Unit Dimensions H X W X D (Inches): 67.5 X 20 X 20 (15 CU. FT)
Service Clearances: 4" on the back, 6” on the top, 21" on the front, and 6” on the sides
Unit Weight (LBS): 266 LBS
Shipping Crate Dimensions H X W X D / Weight: 85 X 29.5 X 27 (Inches) / 366 (LBS)
Venting Type: Direct Vent (2 pipe - intake & exhaust), Power Vent (1 pipe - exhaust only, room air)
Venting Materials (USA): Sch. 40 PVC, Sch. 80 CPVC, Polypropylene, Stainless Steel
Venting Materials (Canada): Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL 29-4C SS)
Vent Size (Diameter): 3” Ø
Max Vent Length - Single Pipe / Power Vent*: 195 FT
Max Vent Length - Two Pipe / Direct Vent*: 95 FT
* Venting Note: From the maximum lengths above, deduct 5 ft. per 90° elbow and 2 ft. per 45° elbow
Ignition: Electronic Spark Ignition
Temperature Range: 100°F – 190°F
Temperature Stability: +/- 4°F (During Demand)
Installation Location Ambient Temperature: 40°F – 130°F
Safety: Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor, Blocked Vent Detector, Dual Flame Sensing
Water Pressure Min / Max (PSIG): 30 / 160
NG/LP - Min. Dynamic Gas Pressure (Full Fire): 2.5” WC (set Gas regulator to 8” WC for NG 11” WC for LP)
NG/LP - Maximum Static Gas Pressure: 14” WC (set Gas regulator to 8” WC for NG 11” WC for LP)
Gas Regulator Pressure Set To: 8” WC for NG, 11” WC for LP
Electrical: 120V AC, 60 Hz
Power Consumption: Max 9 Amps, 10W (Standby)
Internal Water Volume (gallons): 1

Technical specification

Unique ref.iN199
Product familyNeuron
Product groupCommercial Tankless System - Free Standing Slim Design
TypeObject (single object)
Date of publishing2021-12-14
Edition number1

Links

Product urlhttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/neuron/in-199-neuron/
Installation instructionshttps://intellihot.com/intellihot-product-technical-downloads/
Product certificationhttps://intellihot.com/intellihot-product-technical-downloads/
Technical descriptionhttps://intellihot.com/intellihot-product-technical-downloads/

Material mainSteel
Designed inUnited States
Manufactured inUnited States

Classification

BIMobject CategoryHVAC - Water Heaters
IFC classificationHeat Exchanger
ETIM CodeEC000392
ETIM NameInstantaneous water heater
UNSPSC nameCommercial water heaters
UNSPSC code40101826
Uniclass 2015 CodePr_60_60_96
Uniclass 2015 DescriptionWater heaters
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass Number23-31 29 11
OmniClass TitleInstantaneous Hot Water Heaters
CSI UniFormat II CodeD3090
CSI UniFormat II TitleOther HVAC Systems & Equipment

Region availability

North America	South America
Anguilla	Guyana
Antigua and Barbuda	Suriname
Aruba
Barbados
Belize
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Cuba
Curaçao
Dominica
Dominican Republic
Grenada
Guadeloupe
Haiti
Jamaica
Martinique
Montserrat
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States