BAL FLEXBONE 2EASY - Unique Floating Uncoupling Mat For Unprepared Problem Floors.

BAL Flexbone 2Easy is a unique floating uncoupling mat where no adhesive is needed underneath – a truly uncoupled system! Because it is floating, only basic preparation is needed – simply sweep solid, level floors and lay the mat. No remove of residue, bitumen or laitance. No priming needed. Tile immediately to contaminated, stained or cracked screeds and over bitumen. Fast-track tiling on new anhydrite and sand:cement screeds that aren’t cured as moisture evaporates through covering joints.

A game changing truly uncoupled mat system, BAL Flexbone 2Easy is perfect for rental properties, sensitive substrates in heritage project and retail projects as the mat does not need to be bonded – this means the tiled surface can be easily removed and replaced. A truly fast-track system as no preparation is needed on level and flat surfaces, plus save project costs on adhesive, primer and other preparation equipment.

Specification

USE FOR:
- Large format ceramic, porcelain, natural stone, slabs with minimum edge length of 200mm
- Protecting existing floor coverings i.e sensitive heritage background
- Unprepared internal floor substrates – provided they are flat
- Counteracting tension stresses between substrate and tiled surface
- Cracked substrates, mixed substrates, bitumen, contaminated and stained substrates
- Light trafficked commercial areas
- Bathrooms, kitchens, hallways and conservatories
- Heated floors, timber floors, existing load bearing floor surfaces.
- New cement:sand screeds (when walkable), anhydrite screeds at 1.5% CM (usually 0.5% CM).
Colour: Grey with blue mesh
Pack sizes: 20m rolls, 5x 2m2 sheets.
Sheet Width: 1m plus 50mm overlapping
Sheet Thickness: 3mm
Roll Weight: approx. 18kg
Sheet Weight: approx 1.8kg/per sheet